LA1837L-E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Misc ICs and Modules include the LA1837L-E chip. This chip is an integrated circuit for use in radio frequency (RF) communication. Specifically, it is an amplifier for use in a pull-receiver configuration, meaning that the RF signal is amplified after it has been detected from the radio frequency carrier via a rectifier. This is in contrast to a push-receiver configuration where the signal is amplified prior to detection, but the advantage of the pull-receiver configuration is that it has an improved noise figure and is more immune to overloads. The LA1837L-E has an alternative output configuration to the PLL type, allowing the output power to be adjusted to appropriately match the requirements of the application.The LA1837L-E is a dual-channel, low-power, single-supply radio-frequency Amplifier IC, operating from a single voltage supply of 2.7V to 5.5V. It integrates two amplifiers, each of which has a gain of up to 75 dB, and a gain flatness of less than 0.5 dB across a wide band frequency range. With a high input impedance of 50 ohms, the LA1837L-E is designed to meet the demanding needs of radio receivers in wireless communications and other RF signal applications.In a “pull-receiver” configuration, the LA1837L-E offers improved noise-figure and improved dynamic range. The dual-channel amplifier offers an output voltage level that is adjustable through the external bias resistor or voltage. This allows the output voltage level to be adjusted to different levels to suit the application requirements. Additionally, the amplifier has an internally AC-coupled output, allowing the output to be filtered for improved performance.The LA1837L-E also provides bias regulation for the amplifier, regulating the current drawn by the amplifier to provide a stable operating environment. The output is then limited by the control inputs to optimize the performance of the amplifier. The IC also includes ESD protection diodes to protect against damage due to overvoltage or static discharge on the input or output pins.The amplifier is also protected against reverse-bias inputs with an overvoltage protection function. This protects the IC against accidental application of voltages greater than the supply voltage at the input. Additionally, the IC is designed to protect against overloads by limiting the current flow when greater than a pre-set level.In summary, the LA1837L-E is a low-power, DC-coupled radio frequency amplifier IC, designed for use in pull-receiver configurations. It is a dual-channel amplifier, providing adjustable output levels, ESD protection, bias regulation and overload protection. With a wide band frequency range and a high input impedance of 50 ohms, it is designed to meet the needs of radio receivers in a range of wireless communication and other RF signal applications.

The specific data is subject to PDF, and the above content is for reference