LATBT66B-ST-1+TU7-35+QS-3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LED Indication - Discrete

Discrete LED indicators are an important part of many electrical and electronic systems. They are used to provide visual indication of a system\'s status, such as on/off, power, light, and other discrete signals. Latbt66b-ST-1+TU7-35+QS-3 is an LED indication system, which can be used in many distinct applications.

The Latbt66b-ST-1+TU7-35+QS-3 system consists of three pieces of equipment which comprise the whole assembly. The Latbt66b-ST-1 primary infra-red light source, the TU7-35 light sensor, and the QS-3 controller. The Latbt66b-ST-1 is a large-area emitting light source which produces an infrared light emission in the 910-970nm wavelength range. The TU7-35 light sensor then detect this radiation and the QS-3 controller amplifies the signal and triggers or activates the LED. The LED is connected to the secondary circuit and will be activated when the signal from the QS-3 is detected.

Its application fields are highly diverse and dependent on the type of LED used. In industrial control applications, LEDs are used in a variety of situations, such as indication of system status, alerting workers of dangerous situations, and taking control measures in emergency situations. LEDs are also used in automobiles and transport vehicles, in order to indicate system status and alert drivers of situation changes.

These LEDs are also used in numerous consumer electronics, such as computers, cell phones, MP3 players, and gaming consoles. The Latbt66b-ST-1+TU7-35+QS-3 system is capable of detecting and activating a wide range of LED indicators, such as standard LEDs, RGB LEDs, and specialty LEDs. The system can also be used to detect and activate glowing symbols, acrylics and signs for decoration, illumination, and location identification purposes.

The working principle of the Latbt66b-ST-1+TU7-35+QS-3 system is based on the light dependent resistor, or photoresistor. The photoresistor detects the visible or infra-red radiation within its responsivity range, and produces a current or voltage signal which is then fed to the QS-3 controller. The controller amplifies this signal and sends the signal to the LED indicator. This then activates the LED and signals its status.

The Latbt66b-ST-1+TU7-35+QS-3 system is a dependable and robust LED indication system, offering reliability and precision. Its flexibility allows it to be used in a wide variety of applications, making it a perfect choice for many applications. It is a cost-effective and efficient way to monitor and control your LED indicator status.

The specific data is subject to PDF, and the above content is for reference