LCB15JBR200

Series:	LCB
Packaging:	Bulk
Part Status:	Active
Resistance:	200 mOhms
Tolerance:	±5%
Power (Watts):	15W
Composition:	Wirewound
Features:	Current Sense, Flame Proof, Moisture Resistant, Safety
Temperature Coefficient:	--
Operating Temperature:	-55°C ~ 275°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	1.875" L x 0.500" W (47.62mm x 12.70mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors Through hole resistors are one of the most common and popular components for both analog and digital circuits. Through hole resistors are designed to allow current to flow through a specified resistance using a conductive material. The configuration type of the resistance component varies depending on the desired electrical characteristics, such as the ability to dissipate energy, handle high power loads, and provide a consistent resistance. The LCB15JBR200 is a through-hole, chip resistor with a resistance value of 200 ohms. The resistor is constructed using a carbon-film dielectric material and is encased in a nickel-barrel implementation. This configuration ensures consistent performance and decreased resistive values when compared with other carbon-film dielectric materials. The resistor is well suited for applications on both digital and analog circuits and can withstand currents of up to 5amps. In terms of the working principle of a through hole resistor, electric current passes through the device which then imposes resistance limiting the current flow rate. This is possible due to the dissipation of energy from the resistor as the electric current passes through it. This is also known as Ohm\'s law and is used to calculate the values of current and voltage needed for a specific resistor. In this particular case, the LCB15JBR200 has an ohmic value of 200 ohms, which means that a 1 volt flow would result in a 0.005 ampere flow. With regards to practical applications, through-hole resistors are found in many types of electronic circuits and components. Due to the network and design of the circuits, the current is limited to specific levels and at particular amplitudes. The LCB15JBR200, with its 200 ohm resistance value, is mainly used in the automotive industry where it’s low profile and consistent performance make it well suited for either digital or analog circuits. It is also used in basic electronic components such as relays, regulators and logic gates which require a consistent resistive value to ensure accurate operation. Other applications include motor control, signal processing and industrial instrumentation.The versatility of a through hole resistor makes it one of the most widely used components in, not only the automotive industry, but also in consumer electronics. The LCB15JBR200 through-hole resistor is an ideal choice for applications where size and consistent performance is key. Its low profile makes it well suited for digital and analog circuits and its 200 ohm resistance ensures accurate operation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description