Allicdata Part #: | LEA-6T-2-000-ND |
Manufacturer Part#: |
LEA-6T-2-000 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | U-Blox America Inc. |
Short Description: | High-performance u-blox 6's LEA-6 series GPS m... |
More Detail: | N/A |
DataSheet: | LEA-6T-2-000 Datasheet/PDF |
Quantity: | 250 |
Series: | LEA-6T |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Frequency: | -- |
Sensitivity: | -162dBm |
Data Rate (Max): | -- |
Modulation or Protocol: | GPS |
Applications: | General Purpose |
Current - Receiving: | -- |
Data Interface: | I²C, UART, USB |
Memory Size: | -- |
Antenna Connector: | -- |
Features: | -- |
Voltage - Supply: | 2.7V ~ 3.6V |
Operating Temperature: | -40°C ~ 85°C |
Package / Case: | 28-SMD Module |
Supplier Device Package: | 28-LCC (17x22.4) |
Base Part Number: | LEA-6T |
Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us: sales@allicdata.com
1. Description
The LEA-6T-2-000 modules provide precision GPS timing for demanding synchronization applications such as basestations. This module features user configurable frequency and timepulse outputs. An accuracy of up to 15 ns is achievable by using the quantization error information to compensate the granularity of the time pulse. NEO-6T/LEA-6T feature a time mode function whereby the GPS receiver assumes a stationary 3D position, whether programmed manually or determined by an initial self-survey. During stationary operation GPS timing is possible with only onevisible satellite. This means that time can be maintained even under adverse signal conditions or in environments with poor sky visibility. A built-in time mark and counter unit provide precise time measurement of external event inputs. T-RAIM (Timing Receiver Autonomous Integrity Monitoring) is available to detect faulty GPS measurements. NEO-6T/LEA-6T deliver raw pseudorange data for survey and specialist applications. NEO-6T/LEA-6T modules are manufactured in ISO/TS 16949 certified sites. Each module is tested and inspected during production. Qualification tests are performed as stipulated in the ISO16750 standard: “Road vehicles – Environmental conditions and testing for electrical and electronic equipment”.
2. Features
1. u-blox 6 position engine:
- Navigate down to –162 dBm and –148 dBm coldstart
- Faster acquisition with AssistNow Autonomous
- Hybrid GPS/SBAS engine (WAAS, EGNOS, MSAS)
- Anti-jamming technology
2. Simple integration with u-blox wireless modules
3. A-GPS: AssistNow Online and AssistNow Offline services, OMA SUPL compliant
4. Backward compatible (hardware and firmware); easy migration from LEA-5T or LEA-4T (LEA-6T)
5. LCC package for reliable and cost effective manufacturing
6. Optional upgradeable Firmware support
7. Compatible with u-blox GPS Solution for Android
8. Based on GPS chips qualified according to AEC-Q100
9. Manufactured in ISO/TS 16949 certified production sites
10. Qualified according to ISO 16750
3. Highlights
1. Precision Timing:
- 1 or 2 timepulse outputs (up to 10 MHz)
- Single-satellite operation
- Stationary (survey-in) mode for enhanced timing accuracy
- Time mark of external event inputs
2. Raw pseudo-range data output
3. UART, USB and DDC (I2C compliant) interfaces
4. Onboard RTC Crystal for faster warm and hot starts
4. Product selector
5. Pin configuration
Multi-band GNSS receiver with nanosecond...
High-performance LEA-6 series GPS module...
Simultaneous reception of GPS / QZSS, GL...
LEA-M8S module can receive up to 3 GNSS....
High-performance u-blox 6's LEA-6 se...
High-performance u-blox 5 LEA 5 series G...