LEG1-1REC4-63-10.0-01-V

Series:	LEG
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	10A
Number of Poles:	1
Actuator Type:	Lever
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

A circuit breaker is a protective device used to prevent electrical short circuits, overloads, and other electrical problems. Circuit breakers are designed to detect an overload in a circuit, and open the circuit to prevent further damage. The LEG1-1REC4-63-10.0-01-V circuit breaker can be used for a variety of applications including residential, commercial, industrial, and medical. This breaker is suitable for use in conducting direct current and alternating current circuits.

Application Field and Working Principle

The LEG1-1REC4-63-10.0-01-V circuit breaker is designed for applications where a high degree of protection is required. The breaker is compliant with UL 1077, UL 489, UL 1441, and UL 508 standards. It also meets the European CE standard EN 60947-5-5. The LEG1-1REC4-63-10.0-01-V circuit breaker has an adjustable thermal-magnetic trip curve. The thermal-magnetic trip curve means the trip point is adjustable to compensate for load variations in circuits. The breaker is designed with two selective trip elements: a thermal element and a magnetic element. The thermal element provides protection against motors drawing too much current and stalling. The magnetic element is designed to protect the circuit from overvoltages.The breaker has a rated current of 10A and a short-circuit current breaking capacity of 8kA. The breaker also has a voltage rating of 600V AC, a frequency rating of 50/60 Hz, and an ambient temperature rating between -25°C and 70°C. The breaker also has a dielectric strength rated at 2.5kV for 1 minute.

Installation

The LEG1-1REC4-63-10.0-01-V circuit breaker is designed for surface-mount installation, but can be pole-mounted with an optional pole mount kit. The breaker must be properly mounted to minimize the risk of electrical shock and fire. It should be installed according to the manufacturer’s instructions, and all applicable wiring codes. The breaker should be located in an area that is easily accessible and has proper ventilation, and the breaker must be securely mounted. It is important to note that the breaker must be installed in a place where it is not exposed to direct sunlight, water, oil, or any other damaging elements.

Maintenance and Testing

The LEG1-1REC4-63-10.0-01-V circuit breaker should be periodically tested to ensure proper operation and minimize the risk of electrical shock and fire. Visual inspections should be conducted regularly to check for signs of wear or damage.If the breaker is not working properly, it should be serviced by a qualified electrician. The breaker should be thoroughly tested for proper operation before re-energizing the circuit. The breaker should also be tested in accordance with the manufacturer’s instructions after installation to ensure proper operation.

Conclusion

The LEG1-1REC4-63-10.0-01-V circuit breaker is a highly reliable and effective device that can be used in many different applications. The breaker is designed with a thermal-magnetic trip curve to provide maximum protection against overloads and short-circuits. It is designed for surface-mount or pole-mount installation, and should be installed in an area that is not exposed to any damaging elements. The breaker should also be tested regularly to ensure proper operation and minimize the risk of electrical shock and fire.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description