LEP100F-36-GT

Current - Output (Max):	2.8A
Approvals:	CE, cURus, TUV
Minimum Load Required:	No
Size / Dimension:	8.74" L x 2.95" W x 1.38" H (222.0mm x 74.9mm x 35.1mm)
Mounting Type:	Chassis Mount
Operating Temperature:	-10°C ~ 70°C
Efficiency:	85%
Voltage - Isolation:	3kV
Applications:	ITE (Commercial)
Series:	LEP
Voltage - Output 4:	--
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	36V
Voltage - Input:	85 ~ 264 VAC
Number of Outputs:	1
Type:	Open Frame
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC DC Converters
The LEP100F-36-GT is an AC/DC (Alternating Current/Direct Current) converter. An AC/DC converter is a type of power supply that converts AC power to DC power. The AC power (alternating current) is typically generated from a power source such as a plug or the public utility grid while the DC power (direct current) is typically used in many applications such as a computer, television, or radio. The three major components of an AC/DC converter are the rectifier, inverter, and smoothing circuit. The rectifier converts the alternating current into direct current, the inverter converts it back to alternating current, and the smoothing circuit smooths out the ripple in the direct current.LEP100F-36-GT converters are mainly used in industrial applications, usually to connect the higher voltage and current output of a machine to the lower voltage and current input of a controller or processor. These converters also have an isolation transformer built into it, which allows it to convert the AC line voltage into DC without any electrical connection between the two, thus improving safety and reliability. The LEP100F-36-GT is a 36V DC output and can provide up to 5A current. The working principle of the LEP100F-36-GT is as follows: A rectifier converts the AC line voltage to DC. The inverter then takes this DC and converts it back to an AC output, which is then smoothed by the smoothing circuit. The LEP100F-36-GT uses a PWM (pulse width modulation) control to convert the AC input into a DC output. As the input AC voltage increases, more pulses are generated on the output DC side, raising the output voltage.The LEP100F-36-GT has been designed with a variety of features to ensure it meets a range of application needs. It is protected against over current, over temperature and short circuit. It also features an I/O voltage display, adjustable current limit and includes Short circuit and Current Monitor outputs.In conclusion, the LEP100F-36-GT is a great choice for any application requiring AC/DC conversion. It offers the advantages of scalability, cost savings, and low power requirements, making it an ideal choice for a wide range of applications. It is also rugged and reliable, making it a safe bet for industrial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description