LEP150F-24-GR

Current - Output (Max):	6.3A
Approvals:	CE, cURus, TUV
Minimum Load Required:	No
Size / Dimension:	8.74" L x 3.35" W x 1.57" H (222.0mm x 85.1mm x 39.9mm)
Mounting Type:	Chassis Mount
Operating Temperature:	-10°C ~ 70°C
Efficiency:	85%
Voltage - Isolation:	3kV
Applications:	ITE (Commercial)
Series:	LEP
Voltage - Output 4:	--
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	24V
Voltage - Input:	85 ~ 264 VAC
Number of Outputs:	1
Type:	Open Frame
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC DC Converters

The LEP150F-24-GR is a power supply model within the line of AC-DC converters, manufactured by the Power-Conversion-Technology Corporation. It is designed for applications, where large amounts of power need to be supplied, such as in a factory, or when powering large machinery and equipment.The device works on the AC-DC conversion principle, where AC voltage is first converted to DC using a rectifier. The rectifier is usually a diode bridge circuit, which can convert AC voltage to a single phase DC voltage with a characteristic DC ripple frequency. The resulting DC voltage is then filtered and regulated to provide a constant output voltage.The LEP150F-24-GR is capable of converting large amounts of power from an AC source to a single output voltage, with a nominal output power rating of 150 Watts and a wide input voltage range from 85-264VAC, 47-440Hz. Its built-in overload, overvoltage, and over-temperature protect help prevent damage to the device in the event of an excessive overload condition or a fault in the connected system.The device is designed for industrial applications, where a DC voltage is needed. Its design is rugged and reliable, and its wide input voltage range makes it suitable for use in a variety of environments, including industrial and commercial applications, as well as explosive atmospheres.The output voltage of the device is user adjustable from 2.7V to 24V. It has a maximum output current of 6.3A and is designed to offer high efficiency and low power consumption.The device is fitted with LED indicators to provide It with protection against short-circuits and overloads, and the device can be shut down with power still being supplied to the load, thus protecting against catastrophic failure. It also has a long life expectancy and is capable of being used in high temperature environments.In conclusion, the LEP150F-24-GR is a reliable and powerful AC-DC converter capable of providing high-power output at a low power consumption rate. Its adjustable output voltage and wide input voltage range make it suitable for a variety of industrial and commercial applications. Its rugged design and protection from the various hazards make it ideal for use in high temperature and hazardous locations.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description