LEP240F-48-Z43

Current - Output (Max):	5A
Approvals:	CE, cURus, TUV
Minimum Load Required:	No
Size / Dimension:	8.74" L x 3.74" W x 1.77" H (222.0mm x 95.0mm x 45.0mm)
Mounting Type:	Chassis Mount
Operating Temperature:	-10°C ~ 70°C
Efficiency:	87%
Voltage - Isolation:	3kV
Applications:	ITE (Commercial)
Series:	LEP
Voltage - Output 4:	--
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	48V
Voltage - Input:	85 ~ 264 VAC
Number of Outputs:	1
Type:	Open Frame
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC DC Converters

AC/DC converters are electronic devices that convert AC power from an AC power source to DC power. These converters are generally used to power electronic devices or power supplies, such as computers and other consumer electronics. The LEP240F-48-Z43 AC/DC converter is one such device.The LEP240F-48-Z43 AC/DC converter is a high efficiency, compact switch mode power converter with high power factor and low harmonic distortion. It is designed for use in IT equipment, medical equipment, audio and lighting systems, and other applications requiring high efficiency operation.The LEP240F-48-Z43 is a three-phase converter with a wide input range of 95-277VAC. It has a wide output voltage range of 48 V DC with a maximum current rating of 5A. It has a wide temperature range of -40C ~ +85C and a no-load input power of less than 15 watts.The AC/DC converter works by rectifying the input AC voltage using a full wave bridge rectifier. This produces an uncontrolled DC voltage, which is then sent to the switching inverter section of the converter. The switching inverter consists of two power transistors connected in a push-pull configuration which switches on and off at a high speed, creating an alternating current at a specific frequency. The switching frequency is determined by an on-board oscillator and its output is synchronized with the input voltage.The output of the switching inverter is sent through a filter to remove the switching noise and produces a clean DC output. The DC output is then regulated by a linear or non-linear voltage regulator to ensure that the output voltage is constant and does not exceed the maximum rated voltage.The LEP240F-48-Z43 AC/DC converter is a high efficiency, reliable, and cost effective device. It is designed for use in applications where high efficiency and low harmonic distortion are required. It is a versatile device that can be used in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description