Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC DC Converters

LFA50F-48-CJ1 Application Field and Working Principle

The LFA50F-48-CJ1 is an AC/DC converter designed for a wide range of applications in industrial, commercial and automotive markets. It is a high-performance power supply designed to drive a variety of loads, including microwaves, instrumentation, and electric vehicles. This device features a non-inverting polarity switching output stage, allowing it to provide both positive and negative output voltages. The high current and switching frequency enable it to provide highly accurate power delivery in both AC and DC environments.

The LFA50F-48-CJ1 operates in two modes of operation, depending on the input. On AC mains input, the device is configured as an AC-DC converter, which directly rectifies the ac supply and boosts it to produce a regulated and filtered DC output. On DC input, the device is configured as a buck converter, reducing the dc supply voltage to a required level before providing the filtered and regulated output.

In AC mode, the input is rectified through a full-bridge rectifier, filtering out higher-order ripples and noise. The resulting DC voltage is then boosted by an internal high frequency switching regulator to provide the required output voltage. The main components of the switching circuit are an inductor, two MOSFET’s, a capacitor, and a Schottky diode for the input rectification. The MOSFET’s connect and disconnect current to the inductor at high frequency in order to control the input current, while the capacitor filters the switching noise for the output.

In DC mode, the switching regulator operates in buck mode. The input voltage is reduced and regulated by switching a MOSFET at high frequency. The switching frequency is adjusted according to the load demands. For higher current requirements, the frequency is increased, resulting in increased efficiency. The output capacitor filters out any noise created by the switching and rectifier stages. The resulting filtered and regulated DC output is then routed to the load.

The LFA50F-48-CJ1 has an extremely wide range of inputs, from6 VDC to 44 VDC, and a continuous output of 5 VDC at 6 A. It uses standard selectable modes of operation, including Constant Voltage and Constant Current, as well as Power Save and Soft Start features. The device also features Under Voltage Lockout overvoltage, temperature and short circuit protection. It is available in 24, 48, and 56V, and is rated for up to 10kW of output power. It is compact and lightweight, and is suitable for use in industrial and automotive applications.

In conclusion, the LFA50F-48-CJ1 is a versatile AC/DC converter that can be used in a wide range of applications. The non-inverting polarity switching output stage allows it to provide both positive and negative output voltages, and the high current and switching frequency enables it to deliver accurate power in both AC and DC environments. The device features a range of advanced protection and power saving features, and is suitable for use in a variety of application from microwaves to electric vehicles.

The specific data is subject to PDF, and the above content is for reference