LG01-2000A005

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flow Sensors are one of the most important and widely used components in today’s industrial production line. The LG01-2000A005 flow sensors are capable of measuring the speed of a liquid or gas through a pipeline. The range of use for this particular model is quite wide, from oil and gas refineries, to industrial and agricultural operations.

The device’s primary components include a static tube, a pressure port, a process connection and a pair of transducers. The static tube is connected to the pipe where the flow rate is to be measured. The pressure port is connected to a pressure source, such as an air compressor, while the process connection is responsible for connecting the device to the process media, whether it’s a liquid or gas.

The two transducers are each responsible for converting a pressure differential into an electrical signal. The transducers measure the difference in pressure between two points and then convert the reading to an electrical output. The output is then used to measure the flow rate of the process medium.

In order to operate correctly, the LG01-2000A005 flow sensor must be configured correctly. This is done through a combination of the device’s signal conditioning and calibration hardware, which will vary depending on the specific application. The device can also be programmed to accept external control inputs in order to adjust the output signal for different flow rates.

The LG01-2000A005 is an ideal choice for industrial and agricultural applications. It can measure a vast variety of flow rates from low to high, and can be used for both liquids and gases. Its ability to be programmed and calibrated allows it to accommodate a large range of different process variables. Its compact size makes it easy to install and maintain, making it an efficient and cost effective flow sensor.

The specific data is subject to PDF, and the above content is for reference