LHL10TB153J

DC Resistance (DCR):	34 Ohm Max
Height - Seated (Max):	0.551" (14.00mm)
Size / Dimension:	0.433" Dia (11.00mm)
Supplier Device Package:	--
Package / Case:	Radial
Mounting Type:	Through Hole
Inductance Frequency - Test:	1kHz
Operating Temperature:	-25°C ~ 105°C
Ratings:	--
Frequency - Self Resonant:	240kHz
Q @ Freq:	60 @ 79.6kHz
Series:	LH, L Type
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	90mA
Tolerance:	±5%
Inductance:	15mH
Material - Core:	Ferrite
Type:	--
Part Status:	Active
Packaging:	Tape & Box (TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors : LHL10TB153J application field and working principle

The LHL10TB153J is a type of fixed inductor, a device with a variety of uses. This article will described its application field and working principle.

What is a Fixed Inductor?

A fixed inductor, as its name implies, is an electrical component with a fixed inductance. This inductance is the quantity of magnetic flux, or energy, that is stored in the component. The fixed inductance is expressed in terms of units of inductance, usually in microfarads (µF), or henries (H).Fixed inductors are components of electrical circuits, and they can be used in a wide range of applications. In radio-frequency circuits, they are used for power filtering and signal protection. They are also used to produce inductance in audio circuits, providing a variety of tone-shaping benefits.

Application Field of LHL10TB153J

The LHL10TB153J is a type of SMD (Surface Mount Device) fixed inductor. This type of fixed inductor is used in a variety of consumer electronics products, such as mobile phones, digital cameras, PDAs, and tablets. SMD fixed inductors are also used in commercial applications, like CCTV cameras and security systems.The LHL10TB153J is ideal for use in low-voltage output circuits. It has a rated operating temperature range of -40°C to +125°C, which makes it suitable for applications that require higher temperature tolerances. It is also compatible with high-speed digital multiplexing applications.

Working Principle of LHL10TB153J

The LHL10TB153J works by storing magnetic flux in the loop of wire that constitutes its winding. When current flows through the inductor, it generates a magnetic field that induces an electric field within the coil. This electric field generates an opposing current, which causes the inductor to limit the amount of current that is allowed to flow through the circuit.The speed at which this process occurs can be controlled by varying the inductor’s capacitance. This helps to ensure that the correct amount of current is supplied to the circuit, and it also helps to reduce any distortion that may occur due to the inductance.

Conclusion

The LHL10TB153J is a type of fixed inductor, which is used in a wide range of consumer electronics and commercial applications. It is suitable for use in low-voltage output circuits, and can be used for high-speed digital multiplexing. It works by storing magnetic flux in the loop of wire that constitutes its winding, and the speed of this process can be controlled by varying the inductor’s capacitance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description