LI1806E800R-00 Filters |
|
Allicdata Part #: | 240-1032-2-ND |
Manufacturer Part#: |
LI1806E800R-00 |
Price: | $ 0.00 |
Product Category: | Filters |
Manufacturer: | Laird-Signal Integrity Products |
Short Description: | FERRITE BEAD 80 OHM 1806 1LN |
More Detail: | N/A |
DataSheet: | LI1806E800R-00 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | LI |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Filter Type: | Power, Signal Line |
Number of Lines: | 1 |
Impedance @ Frequency: | 80 Ohms @ 100MHz |
Current Rating (Max): | 500mA |
DC Resistance (DCR) (Max): | 300 mOhm |
Ratings: | -- |
Operating Temperature: | -40°C ~ 125°C |
Package / Case: | 1806 (4516 Metric) |
Mounting Type: | Surface Mount |
Height (Max): | 0.073" (1.85mm) |
Size / Dimension: | 0.177" L x 0.063" W (4.50mm x 1.60mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Ferrite Beads and Chips
Ferrite beads and chips are a type of low-inductance resistor, typically used to filter high-frequency signals from low-frequency signals. They are commonly known as “beads” because of their small size and cylindrical shape.
The LI1806E800R-00 is an example of a ferrite bead that provides voltage and frequency-dependent attenuation in the DC to MHz range. It has a low profile and low inductance, making it a good choice for applications where low-power and low noise is needed.
Application Fields
The LI1806E800R-00 ferrite bead is used in many different applications, including:
- Signal and noise suppression in weakly filtered applications
- DC and low AC frequency suppression
- High frequency RF signal attenuation
- Motor control/Power supply interference reduction/EMI
- Signal transformation and s-parameter characterization
It can also be used in a wide variety of other applications, such as in radio-frequency identification (RFID) devices.
Working Principle
The LI1806E800R-00 ferrite bead is designed to filter high-frequency signals from low-frequency signals by utilizing the principle of electrical impedance. As a low-inductance resistor, the ferrite bead has a certain resistance across its length. When a signal passes through the ferrite bead, the signal is attenuated by the resistance of the ferrite bead, depending on the frequency of the signal.
For high-frequency signals, the impedance of the ferrite bead is very low and the signal is not affected by the ferrite bead. Low-frequency signals, on the other hand, are affected by the impedance of the ferrite bead, and are partially or completely filtered out. This allows the signals to be separated from one another, with the low-frequency signals being filtered out and the high-frequency signals passing through unaffected.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
LI1812D121R-10 | Laird-Signal... | 0.08 $ | 2500 | FERRITE BEAD 120 OHM 1812... |
LI1806E101R-10 | Laird-Signal... | 0.06 $ | 12000 | FERRITE BEAD 100 OHM 1806... |
LI1806C151R-10 | Laird-Signal... | 0.06 $ | 1318000 | FERRITE BEAD 150 OHM 1806... |
LI1806E800R-10 | Laird-Signal... | 0.06 $ | 8000 | FERRITE BEAD 80 OHM 1806 ... |
LI1806C151R-00 | Laird-Signal... | 0.0 $ | 1000 | FERRITE BEAD 150 OHM 1806... |
LI1806E101R-00 | Laird-Signal... | 0.0 $ | 1000 | FERRITE BEAD 100 OHM 1806... |
LI1806E800R-00 | Laird-Signal... | 0.0 $ | 1000 | FERRITE BEAD 80 OHM 1806 ... |
LI1812D121R-00 | Laird-Signal... | 0.0 $ | 1000 | FERRITE BEAD 120 OHM 1812... |
FERRITE BEAD 150 OHM 1206 1LN
FERRITE BEAD 60 OHM 0402 1LN
FERRITE BEAD
FERRITE BEAD
FERRITE BEAD
FERRITE BEAD