LK10052R2M-TV

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are passive electronic devices commonly found in electronic products and assemblies. They are used to control and filter signals and provide electrical signal response for either classic or digital circuits. LK10052R2M-TV fixed inductors are one of the most common types used in applications ranging from radio transmitters and receivers to portable digital devices. In addition to being used in general weight and size-restricted applications, they also offer excellent protection against short-circuits and electromagnetic interference (EMI).

The basic design of a LK10052R2M-TV fixed inductor is a ferrite core with two continuous coils or windings. The two coils are wound around the core and interconnected with the appropriate connections. The coils can be either made of metal or wound with a thin layer of electrically conducting material such as copper wire. The windings are connected in series or in parallel to the circuitry surrounding the inductor, depending on the type of application.

The primary purpose of a fixed inductor is to filter out undesired high or low frequency signals in an electronic circuit. This means that the inductor itself does not amplify the signal directly. Instead, it serves as a "substrate" – a resistor for any high-frequency waves – so that only the desired frequency signals pass through. The benefit of using a fixed inductor instead of an active noise filter is that it will not require an external power source and that it is not susceptible to temperature variations as it does not contain any active components. Additionally, because a fixed inductor does not amplify a signal, it can be used with higher frequencies than a typical active noise filter.

LK100 series fixed inductors are especially useful in digital applications, where they are often used to reduce noise levels and protect against high frequency interference. The inductor works by absorbing higher frequency components of a signal, while allowing the desired frequency components to pass through with minimal distortion. This is accomplished through the use of a high quality ferrite core and high grade enameled wire coils. This combination of materials provides an exceptionally low series inductance and high impedance for superior frequency filtering. Additionally, the construction allows for optimal heat dissipation, making the LK100 series one of the few fixed inductors suitable for use in high temperature operating environments.

In addition to providing superior filtering, the LK100 series inductors can also be used as an efficient power supply system in both AC and DC applications. This is possible by using the coil windings as the inductive element to store a magnetic field and use the stored energy to create an alternate current of electricity. When used in this manner, the inductor acts as a transformer, reducing the input voltage to the desired low voltage output. This makes the LK100 series an ideal solution for power supplies in applications ranging from small consumer electronics to industrial motors.

Overall, the LK100 series fixed inductors provide an excellent combination of high performance, low cost, and small size for a wide variety of applications. With their superior filtering capabilities and efficient power supply design, they are ideal for use in both AC and DC circuits. In addition, their high grade construction ensures a long service life and reliable performance, making them an excellent choice for any application requiring a fixed inductor.

The specific data is subject to PDF, and the above content is for reference