LLC105000

Float level sensors are one of the most popular and versatile devices used for many different applications in many different industries. Typically, float level sensors are used to measure liquid level in an open or closed vessel, but they can also be used to measure other physical properties such as pressure, temperature, or even light intensity. The LLC105000 float level sensor from [Manufacturer] is a great example of this type of versatile technology. This article will break down the advanced features, installation details, and working principles of this float level sensor.

Features

The LLC105000 float level sensor from [Manufacturer] features an advanced electronic circuit to accurately measure liquid levels in tanks, pipes, and other vessels. The sensor is also available with various mounting options to fit into almost any type of setup. The housing is constructed of durable materials such as stainless steel and plastic to ensure reliable operation in even the most demanding environmental conditions. Each unit also features a reed switch that provides a contact closure when the measured liquid level reaches a preset point. This built-in switch is an easy way to detect tank overflow or catastrophic fluid spills.

Installation

For best performance, the LLC105000 float level sensor should be installed according to the manufacturer\'s instructions. Most models are suitable for indoor or outdoor use, and can be mounted directly on the surface of the liquid. If installing the sensor in an open vessel, the unit should be mounted in the center of the vessel with the reed switch facing down. The unit can also be mounted to the side or bottom of a vessel with the reed switch facing up. In this configuration, the reed switch should still be located in the middle of the vessel, but slightly below the liquid level. Take care to read all the necessary instructions before starting the installation process.

Working Principle

The LLC105000 float level sensor uses an electronic circuit to measure liquid levels and send the data back to a connected device. This works through a series of on/off relays activated by a small magnet which is attached to a weighted float. As the liquid level rises and lower, the float move correspondingly, and the magnet is positioned to either complete or interrupt the circuit. When the circuit is completed, a signal is sent to the connected device to indicate the current liquid level. With this information, the device can take any necessary actions, such as turning off pumps or activating alarms.

The LLC105000 float level sensor from [Manufacturer] is a great choice for applications that require the accurate measurement of liquid level. The product is available in various mounting options and features a durable construction. Additionally, the included reed switch makes it easy to detect liquid level changes, and it can be easily integrated into new or existing installations thanks to its advanced electronic design.