Allicdata Part #: | 480-6009-ND |
Manufacturer Part#: |
LLE205100 |
Price: | $ 0.00 |
Product Category: | Sensors, Transducers |
Manufacturer: | Honeywell Sensing and Productivity Solutions |
Short Description: | LLE LIQUID LEVEL SENSOR |
More Detail: | Liquid Level Sensor Push-Pull High-Dry Output Male... |
DataSheet: | LLE205100 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | LLE |
Part Status: | Obsolete |
Type: | Liquid |
Output Type: | Push-Pull |
Output Configuration: | High-Dry |
Current: | 5mA |
Switch Actuation Level: | -- |
Mounting Type: | Male 1/2" (12.7mm) BSP |
Material - Housing & Prism: | Polysulfone (PES) |
Operating Temperature: | -40°C ~ 125°C |
Voltage Rating: | 5 ~ 12 V |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Float and level sensors are widely used in many industries to measure the level of a liquid or bulk solid. The LLE205100 is one type of float and level sensor that uses the principle of buoyancy to work. The LLE205100 can be used in a variety of applications, including industrial level control, chemical level monitoring, and water level detection. It is also suitable for applications that require accurate and reliable measurements.
This sensor can be installed in several different locations within a process system, including tanks, tanks, pipes, reactors, and other vessels. It is designed to detect liquid levels with a high level of accuracy. The LLE205100’s robust design ensures dependable performance over time. Its advanced electronics allow for precise measurements and operation in a wide range of settings.
The working principle of the LLE205100 is based on buoyancy. A float, which is typically a weighted casing, is suspended within the tank or reservoir. As the fluid level rises and falls, the float moves up and down and is connected to a reference point. The reference point is typically an electrical switch that turns on or off when the float reaches its desired level. The electrical switch then sends a signal to a process controller, which can be programmed to control the process accordingly.
The LLE205100 is designed to provide a highly accurate and reliable measure of liquid levels. It uses a stainless steel cable or rod to connect the float to the reference point. This enables the switch to be controlled more accurately. The DuraSwitchTM Housing ensures the sensor is protected and reliable in harsh environments. The float itself is made from corrosion-resistant materials, and the sensor can be programmed for a wide range of measurement points.
In addition, the LLE205100 offers a number of features that make it suitable for many applications. It is able to operate in temperatures from -40° to 85°C, and the accuracy of the level detection can be set to as low as 0.1 mm. The sensor also features an LED indicator that allows for visual monitoring of liquid level information, and it can be programmed to send out an alarm when the level reaches a critical point.
The LLE205100 is suitable for a wide range of applications, including industrial process control, chemical level monitoring, and water level detection. It is a reliable and accurate way to measure liquid levels, and its robust design and flexible features make it an ideal choice for many industries.
The specific data is subject to PDF, and the above content is for reference
REED SENSOR W/INTEGRAL FLOATLiquid Level...
1.5 NPT FLTSW REED SSLiquid Level Sensor...
CABLE FLOAT HORZ SPST-NO 10ALiquid Level...
FLOATSWITCH HORIZ 1A NO/NC PPSLiquid Lev...
FLOAT SWITCH 25VA PPS 1M PVC NITLiquid L...
SWITCH CLS16 WHT L2000MM CBL 2MLiquid Le...