LM96530SQE/NOPB Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LM96530SQE/NOPB – widely applicable in several interface fields as a specialized component – extensively utilizes the concept of Serial Peripheral Interfacing (SPI). This component works as an synchronous serial, data input and output interface. In the field of Serial Digital Interface (SDI), it will usually act as the master component and in the Inter-Integrated Circuit, it will act as the slave component. This thereby is an ideal choice for applications that require data transfers to and from an electronic component.

SPI is a communication protocol for practically simultaneous, serial data with four electrical/logical wires which are:
1. An MOSI (Master Out Slave In) line
2. An MISO (Master In Slave Out) line
3. A Chip Select line
4. A Serial Clock line.

These 4 electrical/logical lines are used in the practical implementation of the component as they enable multiple slaves and masters simultaneously receive, transmit and interact with data. The data-transmission rate is determined by the chip select line. The SPI interface is made up of three data formats, which are:
1. Byte Data
2. Word Data
3. Frame Data

The data rate is the ability of a device to transfer data from the LM96530SQE/NOPB to the desired destination device. This component supports several data rate formats from less than 1MHz to 40MHz depending on the serial turbo-mode. The component is designed to reside at the supporting area of the serial clock and its required data (from MOSI and MISO) per clock pulse, in order to ensure that the transmission rate effectively matches the application\'s requirements. The LM96530SQE/NOPB component provides the ideal synchronization between the master and slave devices.

The synchronous serial input/output of this component is utilized by several specialized applications in interfaces such as Touch-Panel displays, LCDs or cameras, and in addition, the component is also capable of sending digital audio or video data for Infrared controls and for Remote Controls applications. The component is also able to send and receive data to the external DACs. The actual working process of this component has been mentioned above and will be discussed in the later part of this article.

The working of this component depends on its clock speed and memory size. The clock speed determines the data rate which is typically (just as mentioned above) between 1MHz to 40MHz. The memory size determines how many bits of data can be transmitted / received at one time. The external memory size required by this component is 66 bits allotted for each slave-device. This includes 16 commanding bits, 17 reserved bits, 18 address bits, 15 data bits and 4 parity bits. As the size of memory and clock speed increases, the data rate also increases. Furthermore, the processor can be clocked to a higher speed with the use of a clock multiplier. When the clock speed reaches at 40Mhz, the clock multiplier will cause further cloaking of the clock up to 80MHz which is crucial for the interfaces of LCDs, Touch-Panel displays, and cameras.

The master-slave label assigned to the component does not determine its functionality, as this component is capable of performing several operations. The component can act as a master to a slave Device, a device to a master, or both, depending on the application requirements. Once the data is uploaded to the device, the component polls the commands and converts the processors commands and data into electronic signals.

The LM96530SQE/NOPB component is an ideal choice for applications that require ultra-fast transmission rates and ease of use. This component uses multi-processor technology that makes a synchronization between the master and the slave components. The component recognizes a consistent scroll in the commands or data which further results in improved performance. Furthermore, the component can switch between single or dual-processor operation modes depending on the application. Moreover, the component permits an individual clock multiplexing protocol that guarantees that the transmission rate effectively matches the application\'s demands. The component will then offer the flexibility to approach and complete the data transfer at an ultra-fast rate.

The component is also known for its ability to detect and respond to the presence of a slave device, thus ensuring data integrity. The device will also respond to remote commands from other components over electrical signal paths. The integrated device driver is further helpful as it allows seamless communication via a single drive protocol, which further reduces design complexity and system response time. Finally, the component is compatible with a wide range of devices making it an attractive product for a wide range of automotive, industrial, and consumer applications.

The specific data is subject to PDF, and the above content is for reference