LMLC1-1RLS4-52-60.0-01

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are devices that protect electrical systems and equipment from damage caused by overloads and short circuits. The LMLC1-1RLS4-52-60.0-01 is a type of electronic circuit breaker designed to protect machines from overheating and electrical faults.

This circuit breaker consists of three primary parts. The first is a set of contact points that open when the circuit is overloaded and needs to be shut off. The second is a sensor, which detects when the load on the circuit has exceeded the maximum rated voltage. Finally, the third is a relay that automatically shuts off the circuit when the overload is detected.

The LMLC1-1RLS4-52-60.0-01 is designed to be used in applications such as elevators, motor controls, and power distribution systems. Its primary function is to protect the equipment and wiring from dangerous overloads and short circuits. When the circuit is overloaded, the contact points open and the transformer automatically disconnects the circuit, thereby preventing damage to the equipment or wiring.

The LMLC1-1RLS4-52-60.0-01 works by using current and voltage sensors to detect when the current or voltage exceeds the maximum rated value. If the overload occurs, the contact points open and the relay automatically switches off the circuit. The timer time delay ensures that the circuit is not reconnected until the overload has been cleared and the sensor has restored the correct operating parameters.

The LMLC1-1RLS4-52-60.0-01 is designed with a reverse voltage protection system that prevents it from being activated by reverse currents. This system prevents the circuit from being switched on inadvertently, ensuring that equipment is not damaged due to accidental operation. It also prevents dangerous reverse current spikes caused by power surges.

The LMLC1-1RLS4-52-60.0-01 is a reliable and cost-effective circuit breaker that is easy to install and maintain. It is designed to protect equipment from overheating and failure due to overcurrent and short circuits. While it is not suitable for all applications, it is an essential part of any electrical system where safety is a concern.

The specific data is subject to PDF, and the above content is for reference