LMLHPK11-1-51-150.-01-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit Breakers are used to protect electrical circuits from damage caused by excess current. The important application area of Circuit Breakers is to protect from electrical damages due to overloading, short-circuit, ground faults, and many other problems which may arise in an electrical circuit.

As the name suggests, the LMLHPK11-1-51-150.-01-V Circuit Breaker is designed for applications in electrical systems. This type of Circuit Breaker works on the principle of air introduction. When the current flowing through the circuit exceeds the specified limit, the air enters the switch through a special device which is called the pressure-sensitive element. This pressure-sensitive element is connected to the circuit breaker and when the current flow exceeds a certain level, the pressure-sensitive element detects the overcurrent and opens the contacts of the circuit breaker. This opens the circuit and prevents further damage to the electrical system.

The switch of the LMLHPK11-1-51-150.-01-V Circuit Breaker has two positions: open and closed. In the open position, the switch interrupts the current flow and starts the interruption process. In the closed position, the switch re-establishes the connection between the two sides of the electrical circuit and resumes the power flow. The switch is usually set at a certain voltage level which is known as the maximum operating current. This maximum operating current should not be exceeded to maintain the safety of the circuit.

This Circuit Breaker can be used in applications where the current rating is over 150 amps. It is suitable for use in industrial and commercial power systems. It is also suitable for pole-mounted power systems, such as those used in wind power generation systems. It is also used in large and medium-sized equipment where short-circuit protection is necessary.

The LMLHPK11-1-51-150.-01-V Circuit Breaker is easy to install, maintain, and operate. It requires no specialized knowledge or tools for its installation. It is designed to provide reliable and safe protection to electrical systems. It is also suitable for use in hazardous locations, such as those where flammable or explosive substances are present, by disabling the power system in the event of an electrical fault.

In conclusion, the LMLHPK11-1-51-150.-01-V Circuit Breaker is a reliable and cost-effective solution for protecting electrical systems in applications where the current ratings exceed 150 amps. Its simple operation and easy installation make it a perfect choice for a wide range of electrical systems.

The specific data is subject to PDF, and the above content is for reference