LMS202EIMX/NOPB

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Last Time Buy
Type:	Transceiver
Protocol:	RS232
Number of Drivers/Receivers:	2/2
Duplex:	Full
Receiver Hysteresis:	600mV
Data Rate:	230kbps
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	16-SOIC
Base Part Number:	LMS202

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The LMS202EIMX/NOPB is an integrated, high-performance, low-power, high-voltage application field and working principle device consisting of a driver, receiver, and transceiver. The device has been designed to deliver higher levels of performance than conventional analog-to-digital and digital-to-analog (A/D and D/A) converters. It combines two high-side drivers (HSD) and two low-side drivers (LSD) with two analog-to-digital receivers (ADC) and two digital-to-analog receivers (DAC), and it offers superior performance under high-voltage conditions. In addition, the device has two switching state transceivers, which provide digital and analog signal isolation, current sensing, and temperature monitoring, and it supports various digital protocols, including CAN, I2C, and SPI.

Features

The LMS202EIMX/NOPB has several features that make it suitable for a variety of applications, including:• High-voltage operation: The device is a high-voltage application and working principle device, capable of operating at up to 60 V.• Low power consumption: The device has been designed to operate at low power, with a minimum quiescent current of 10 mA.• High-performance transceivers: The device features two high-speed transceivers that provide digital and analog signal isolation as well as current sensing, temperature monitoring, and other functions. • ISR protocol support: The device supports various ISR protocol standards, including CAN, I2C, and SPI, for compatibility with a range of digital systems.• Wide operating temperature range: The device is capable of operating at temperatures ranging from -40°C to +125°C, making it suitable for use in both automotive and industrial applications.

Applications

The LMS202EIMX/NOPB can be used in a variety of applications, including:• Automotive powertrain: The device can be used for applications such as engine/transmission control, electronic fuel injection, and electric braking.• Industrial automation: The device can be used for applications such as machine and process control, robotics, and HVAC controllers.• Home automation: The device can be used for applications such as lighting and security systems.• Renewable energy: The device can be used for applications such as solar power harvesting and wind power generation.

Working Principle

The LMS202EIMX/NOPB works by controlling a set of high-side drivers (HSD) and low-side drivers (LSD), which provide the necessary current to drive the system. The HSDs are connected to the output (load) and the LSDs are connected to the input (controller). Both the HSDs and LSDs are connected to the device’s two ADC receivers. This enables the device to detect changes in current, voltage, and temperature, as well as changes in the internal state of the system.The device is also equipped with two transceivers, which allow for digital and analog signal isolation. The transceivers provide digital interfaces for the controller, allowing it to send and receive data from other devices. The transceivers are also used to monitor the system’s state, current, and voltage, and to provide control signals to the controller. Finally, the device supports various ISR (Input/Output) protocols, such as CAN, I2C, and SPI, allowing it to be integrated into a variety of digital systems.

Conclusion

The LMS202EIMX/NOPB is a high-performance, low-power, high-voltage application field and working principle device that combines a driver, receiver, and transceiver in one package. The device is capable of operating at up to 60 V, has low power consumption, and supports various ISR protocols, making it suitable for a variety of applications, from automotive powertrains to home automation systems. The device is also equipped with two transceivers, which provide digital and analog signal isolation, current sensing, and temperature monitoring.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description