LMV115MG/NOPB RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LMV115MG/NOPB is an integrated circuit (IC) belonging to the RF Misc ICs and Modules family. The chip was designed and developed to allow applications for gain control and amplifier operations in a wide range of frequencies, for instance from 10 MHz to 1000 MHz. It is a CMOS-based low voltage buffer, and operates from a single 2.7V to 3.75V supply.

It is a monolithic IC capable of a low noise figure of 1.05 dB and a minimum operating frequency of 10 MHz. The maximum power output of the chip is +20 dBm into a 50 ohm load. The low bias current of the device makes it ideal for low power consumption in various applications.

The general application of the LMV115MG/NOPB is to allow low-phase noise gain control in receiver applications. The device consists of two GAINs, 10db and 2dB, which can be operated independently. The chip embodies high performance, low noise performance, low power dissipation and high reliability.

It features low distortion of 0.11% into a 50 ohm load. The chip is also configurable for voltage-controlled gain. It has a wide expanse of impedance bandwidth for gain control applications, a dynamic gain of 35 dB, a static gain of 10 dB and a noise figure of 1.05dB. It also has a linear voltage-to-current ratio of 7.5dB/V and a nominal gain of 10 dB.

The working principle of the device is as follows. When a signal is generated, it is then amplified by two differentially connected transistors for low distortion and low noise. This amplified signal is passed through several gain stages, including 10dB and 2dB, and the output of the device has adjustable gain controlled by the gain control voltage, or GCV. The GCV ranges from 0V to 5V and controls the gain of the device. The device also produces a low-noise output signal to ensure proper operation.

The LMV115MG/NOPB is a versatile device, which is suitable for a number of applications, particularly receiver applications, amplifier operations and low noise amplification, as well as providing low-phase noise gain control. It can be used in applications that require low operating voltage, low distortion, low noise figure and high power output. For these reasons, the device is ideal for high-performance, low-power applications in RF system design.

The specific data is subject to PDF, and the above content is for reference