LN1351CTR Optoelectronics

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LED Indication - Discrete components such as LN130CTR are often used to provide visual feedback in electronic devices. These components can be used to indicate the status of an electronic device, or provide a warning that an action should be taken.

The LN130CTR uses a conventional 5-pin circuit, which consists of a common pin and four signal pins, usually labeled signal 1 through signal 4. This common pin is the drive line that provides the signal to the LEDs connected to the signal pins. The signal pins correspond to the LED states being active, inactive or flashing.

The LEDs connected to the LN130CTR are generally slow-operation, so they respond slowly and steadily to the signals sent to them. When the signal line receives a pulse, the LED is activated, and when the signal line sends a high voltage, the LED is de-activated. If the signal line sends a low voltage, the LED will be flashing.

The applications for the LN130CTR are diverse, ranging from providing visual feedback in consumer electronics to providing warnings in industrial applications. In consumer electronic applications, LED indicators can be used to indicate when a device is charging or when a button has been pressed. In industrial applications, LED indicators can be used to indicate when a machine is on or when a part needs to be replaced.

In addition to its many applications, the LN130CTR also has a variety of working principles. The most common way that the LEDs are driven is through a current-sourcing output circuit. This type of driver circuit sends a constant current to the LED, regardless of the voltage level of the signal line. This ensures that the LEDs are properly driven, and also helps to ensure a steady and consistent operation.

Other LN130CTR working principles involve pulse-width modulation (PWM), wherein the duty cycle of the signal line is modulated to control the brightness of the LEDs. In addition, the LEDs can be driven using a resistor-capacitor (RC) circuit, wherein the capacitor is used to store charge, which is then released to the LEDs through the resistor.

Overall, the LN130CTR is a reliable and versatile component that can be used in a variety of applications. It is capable of providing visual feedback in consumer electronics, as well as providing warnings in industrial applications. Moreover, it can be driven by various working principles, ranging from current sourcing output circuits to PWM.

The specific data is subject to PDF, and the above content is for reference