LP0805A0902ASTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Filters often play a vital role in controlling the signal strength in various radio communication systems. One of the most common filter types used in this regard is the LP0805A0902ASTR. This filter type is a dual-pass filter, meaning it contains two sets of electrical components in order to achieve signal filtering. In order to fully understand the application field and working principle of the LP0805A0902ASTR, this article will discuss its features, components, and principles in detail.

The main feature of the LP0805A0902ASTR is its dual-pass filter design. Two sets of electrical components work together to achieve RF filtering. The components of the LP0805A0902ASTR are inductors and capacitors, which are assembled in a specific configuration to provide the desired filtering. This configuration is referred to as a “ladder-like” structure, and consists of five individual capacitors and three inductors.

The inductors used in the LP0805A0902ASTR are Ceramic Core Inductors. The ceramic core provides high inductance by controlling the field distribution in the inductor structure. This allows for higher signal handling capability, which is a necessity for the lp080A0902ASTR’s intended application. Additionally, the inductors provide increased stability by limiting the amount of RF energy that can pass through the filter.

In addition to the inductors, the LP0805A0902ASTR also contains parallel-connected, SMD-type capacitors. These capacitors provide the required reactance for filtering the signal. The capacitors are capable of handling up to 60 volts of DC bias voltage between their pins, allowing them to be used in high power applications. Furthermore, each capacitor has an operating frequency range of 20 MHz to 300 MHz, allowing it to provide an adequate signal filtering service to the entire frequency range.

Once the components of the LP0805A0902ASTR have been configured in their “ladder-like” structure, the signal is divided into two paths. This process occurs due to the impedance mismatch between the sections of the filter. The first path passes through the inductors, while the second passes through the capacitors. In this way, the signal is filtered in both directions, allowing the desired frequency range to pass through the filter while suppressing other unwanted frequencies.

Finally, the filtered signal is then passed through the LP0805A0902ASTR’s output path, where it is equalized by an impedance matching network. This network consists of a series of inductors and capacitors, which are used to shape the signal to match the desired output. This output can then be used for various radio communication and data transfer applications.

In conclusion, the LP0805A0902ASTR is a dual-pass filter module used in the radio frequency industry. It features Ceramic Core Inductors and SMD-type capacitors, which are configured in a “ladder-like” structure. This structure allows the required signal filtering to be achieved, while providing high power and frequency ranges. Additionally, an impedance matching network is used to equalize the signal, allowing it to be used in various applications. This makes the LP0805A0902ASTR a reliable and cost-effective solution for RF filtering.

The specific data is subject to PDF, and the above content is for reference