LP2950ACZ-5.0/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The Texas Instruments LP2950ACZ-5.0/NOPB is a low-dropout (LDO) linear voltage regulator designed for medium-to-low current applications in the adjustable output range of 1.2V to 10V. It provides a fast transient response and a high 120dB power supply rejection ratio (PSRR) at 10Hz, making it suitable for applications that require a clean output voltage with minimal ripple such as in automotives, telecommunications and consumer electronics. This article will explain the various applications and working principles behind the LP2950ACZ-5.0/NOPB linear voltage regulator.

The LP2950ACZ-5.0/NOPB includes a power enable/standby pin to reduce quiescent current to a mere 0.2µA. It features an internal short-circuit current limit and thermal shutdown protection. This linear voltage regulator has an output voltage accuracy of ± 2% over line, load and temperature conditions, with a 2-pin SOT-223 package providing high power density and excellent thermal performance. With its wide input voltage range of 2.8V to 24V, the LP2950ACZ-5.0/NOPB is perfect for low-noise, clean-power applications in battery-powered equipment.

The LP2950ACZ-5.0/NOPB can be used in a variety of applications such as in automotive ECUs, telecoms, portable video amplifiers, remote controls, and healthcare monitoring systems. Its high PSRR makes it ideal for stabilizing the output of power supplies, thereby preventing supply noise from affecting the system\'s performance. It can also be used in non-battery-operated applications, such as converters, RF boosters and cellular base station power supplies.

The LP2950ACZ-5.0/NOPB utilizes an internal low dropout voltage approximately equal to 1.3 volts. This allows it to operate with an input voltage that is only slightly higher than its output voltage. In addition, the amplifier has an output voltage that is maintained over line and load variations with a fast transient response. The LP2950ACZ-5.0/NOPB also features an open-loop gain of 1000, which allows for excellent stability and tracking over a wide temperature range.

The LP2950ACZ-5.0/NOPB is designed to be used as either an adjustable or fixed voltage regulator depending on the Voltage Set Pin, which can be adjusted for an adjustable output voltage from 1.2V to 10V. The output voltage is controlled by a voltage divider, and can be set by connecting the Adjustable Voltage Set Pin (VADJ) to a low-side battery, ground, or through a suitable voltage divider network. This allows the system to be easily tailored to specific applications.

In its simplest form, the LP2950ACZ-5.0/NOPB consists of two main components, the pass transistor and an error amplifier. The pass transistor is responsible for regulating the output voltage, while the operational amplifier (Op-amp) senses the voltage across the pass transistor, compares the sensed voltage to a reference voltage and then provides a control signal to the pass transistor to regulate the output voltage. This type of topology is known as a "voltage regulator" and is commonly used in linear voltage regulation.

The internal slew rate of the LP2950ACZ-5.0/NOPB is also dependant on the value of the load current and the output impedance of the load. For example, at a higher load current or a higher output impedance the output voltage may be slow to respond to a sudden change in load. The internal slew rate of the device can be improved by inserting an external capacitor across the output of the voltage regulator, but the output impedance should be kept to a minimum to ensure good transient response.

The Texas Instruments LP2950ACZ-5.0/NOPB is an excellent choice for medium-to-low current applications looking for a reliable linear voltage regulator. With its fast transient response, low dropout voltage, wide input voltage range, adjustable output voltage range and low quiescent current, the LP2950ACZ-5.0/NOPB is ideal for applications requiring a stable output voltage with minimal ripple. Additionally, its 120dB power supply rejection ratio makes it suitable for applications that require high levels of noise immunity.

The specific data is subject to PDF, and the above content is for reference