LPA0618-500KL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors play a variety of roles in modern electronics and electrical engineering. They are used in applications ranging from traditional power supplies to RF/microwave circuits and digital signal processing systems. In addition to basic circuit design functions such as amplitude, phase, and frequency control, some inductors are designed to act as transformers, inductive filters, resonators, and phase shifters. The LPA0618-500KL fixed inductor is an example of a fixed inductor that has numerous applications.

The LPA0618-500KL is a through-hole, leaded, molded inductor with a ferrite core. It has a nominal inductance of 500kHz and a current rating of 4A. The maximum operating temperature range is -55 to +105°C with an insulation resistance of 0Ω. The package size is 8.0 x 6.5 x 5.4 mm with a mount type of surface-mountable. The winding material is copper-tinned and the inductance tolerance is ±100 ppm. In addition, the insulation resistance value is 1.25 times the rated current.

In many applications, the LPA0618-500KL is used as a low frequency AC filter. It provides a wide range of filtering solutions when used with other components such as capacitors and resistors. For example, if the inductor is used with two capacitors it can form a high pass filter with a cut-off frequency determined by the product of the inductance and capacitance values. In a more complex filter design the inductor can be used with resistors and capacitors to form a differentiator, integrator, or notch filter circuit.

The LPA0618-500KL is also used as an inductive transformer to provide frequency conversion or impedance matching. For example, it can be used as a step-down transformer in power supplies to reduce AC voltage from the mains voltage. The transformer can also be used in audio applications to match the impedance of the output circuitry to the input of another audio device. The transformer can also be used to match the input circuitry of a radio receiver to an antenna.

The LPA0618-500KL can also be used as an inductive resonator. Resonators are useful components for generating signals of specific frequencies, amplitudes, and wave shapes. They can be used in radio frequency (RF) circuits to generate a carrier wave or to ensure that only signals of the correct frequency are transmitted. The inductor can also be used in high-speed digital circuitry to reduce interfering signals, as well as in analog circuitry to reduce radiated emissions.

In summary, the LPA0618-500KL is an excellent example of a fixed inductor with a wide range of applications. It is well suited for use in AC filters, transformers, resonators, and in many other types of analog and digital circuits. Its versatility, reasonable cost, and small size make it an ideal component for use in both commercial and consumer electronic products.

The specific data is subject to PDF, and the above content is for reference