LQH2HPN6R8MG0L

Series:	LQH2
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Wirewound
Material - Core:	--
Inductance:	6.8µH
Tolerance:	±20%
Current Rating:	590mA
Current - Saturation:	800mA
Shielding:	Shielded
DC Resistance (DCR):	600 mOhm Max
Q @ Freq:	--
Frequency - Self Resonant:	10MHz
Ratings:	--
Operating Temperature:	-40°C ~ 85°C
Inductance Frequency - Test:	1MHz
Mounting Type:	Surface Mount
Package / Case:	1008 (2520 Metric)
Supplier Device Package:	1008 (2520 Metric)
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Height - Seated (Max):	0.039" (1.00mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to fixed inductors

A fixed inductor, also known as a fixed device, is an electrical component made up of a coiled conductor used to convert electrical energy into magnetic energy and store it as a magnetic field. This type of device can be used to filter, limit, and shape electrical signals in high frequency circuits or for storing energy in low frequency DC power circuits.

LQH2HPN6R8MG0L Application Field & Working Principle

The LQH2HPN6R8MG0L is a fixed inductor with a compact and small size. It is suitable for various surface mounted applications such as high-end consumer electronic products, audio/video, and computer/networking devices. This device can be used to provide a certain frequency and bandwidth filtering as well as increased inductance for magnetically coupled circuits. The working principle of the LQH2HPN6R8MG0L is based on the principles of inductance and magnetic flux. When current flows through the inductor\'s coil of wire, a magnetic field is created that opposes the change of current and produces a magnetic flux. This flux is then converted into potential energy, which is stored in the form of a patterned inductive field. This field then changes the resistance of the device according to its inductance. The LQH2HPN6R8MG0L can also be used for high frequency signal shaping and wave filtering. This type of filter is commonly used in radio frequency (RF) and high frequency (HF) applications to prevent interference or noise from entering a signal path. By placing the inductor in the signal path, the alternating current is forced to alternate its route through the device and is filtered by the inductive field that is created. The inductor then allows only the desired, or chosen, frequency signals to pass.

Conclusion

The LQH2HPN6R8MG0L is a fixed inductor, intended for use in a variety of electronic devices. It is mainly used for high frequency and high voltage applications, such as RF and HF signal shaping and wave filtering. Additionally, this device can store energy as well as increase inductance for magnetically coupled circuits. With its small size and compact design, the LQH2HPN6R8MG0L can be used in a wide range of surface mount applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description