LR1F360K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

The LR1F360K is a type of device used in electrical engineering for applications where a resistor is required. These types of resistors are typically used in power supplies, signal conversion applications, current-limiting circuits, etc. This type of resistor also has very low thermal noise, meaning that it can be used in low-noise environments without compromising the signal quality.

Mechanically, the LR1F360K is a through-hole resistor, meaning that it is generally mounted on the PCB via a hole that is drilled or pre-existing. This type of resistor is also known as an axial lead resistor, because of the leads (wires) that connect it to the circuit board on one side, and the other side of the resistor is supported by the mounting hole.

The LR1F360K is a fixed or non-variable resistor, meaning that the resistance stays fixed and does not alter when exposed to voltage or signal fluctuations. The value of this type of resistor is measured in Ohms, and the resistance for the LR1F360K is 360K Ohms. The power rating for this resistor is typically 5 watts, and the voltage rating is 250V for the standard LR1F360K resistor.

In terms of working principle, the LR1F360K works similarly to other resistors and is based on Ohm\'s law. This states that the current flowing through the resistor is directly proportional to the applied voltage. The key to this working principle is the resistor\'s material composition. By selecting the right materials, and designing the structure of the resistor, one is able to obtain the desired resistance. The choice of materials also has an impact on the resistor\'s power rating and operating temperature range.

In summary, the LR1F360K is a type of through-hole resistor used in electrical engineering. This type of resistor comes with a fixed resistance of 360K Ohms, and a power rating of 5 Watts. Its working principle is based on Ohm\'s law, which states that the current flowing through the resistor is directly proportional to the applied voltage.

The specific data is subject to PDF, and the above content is for reference