Allicdata Part #: | LRS40-15-900G-ND |
Manufacturer Part#: |
LRS40-15-900G |
Price: | $ 2.77 |
Product Category: | Power Supplies - External/Internal (Off-Board) |
Manufacturer: | Bel Power Solutions |
Short Description: | AC/DC CONVERTER 15V |
More Detail: | Enclosed AC DC Converter 1 Output 15V 40A 85 ~ ... |
DataSheet: | LRS40-15-900G Datasheet/PDF |
Quantity: | 1000 |
4 +: | $ 2.52000 |
Current - Output (Max): | 40A |
Approvals: | cCSAus, CE |
Minimum Load Required: | -- |
Mounting Type: | Chassis Mount |
Features: | Hot Swappable, Universal Input |
Operating Temperature: | -40°C ~ 71°C |
Efficiency: | -- |
Voltage - Isolation: | 3kV |
Applications: | ITE (Commercial) |
Power (Watts): | -- |
Series: | LRS |
Voltage - Output 4: | -- |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 15V |
Voltage - Input: | 85 ~ 264 VAC |
Number of Outputs: | 1 |
Type: | Enclosed |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
AC/DC converters, such as the LRS40-15-900G, are essential components in electrical systems for power conversion. They are used to convert incoming alternating current (AC) signals into direct current (DC) signals for use by various electronic components. The LRS40-15-900G is a line frequency transformer and rectifier, also known as an AC-DC unironed converter. This device can be found in a number of applications, ranging from telecommunication systems to power control circuits and motor drives to medical imaging devices.
The LRS40-15-900G has a step-down transformer design such that input voltages of 90-264 VAC are converted into an output of up to 15 VDC with a maximum output current of 900 milliamps (mA). It features a wide input range of 90-264 voltages, allowing superior synchronous rectification even at low input voltages. Additionally, it offers superior energy efficiency, reducing overall operating costs. It is also highly reliable, demonstrating minimal temperature influence and high load stability.
The working principle of the LRS40-15-900G AC-DC converter is based on a line frequency transformer and rectifier circuit. First, a transformer is used to reduce the incoming AC signal to the desired DC output voltage. This is then followed by a rectifier circuit—typically a bridge rectifier—which converts the AC signal into a DC signal. This design is specifically beneficial in cases where the input voltage is lower than the output voltage. The bridge rectifier contains four diodes connected in a "bridge" configuration, with each diode allowing current to flow in either direction across it and rectifying AC into DC.
When put into practical use, the LRS40-15-900G AC-DC converter will typically be connected to the input voltage, and then wires will be connected from the output. It is important to note that these wires must be connected to the correct polarity, as indicated clearly on the device. Also, all unused pins should be insulated to prevent shorts or other electrical problems. Once this setup is completed, the module should be ready for use.
The LRS40-15-900G AC-DC converter is a reliable and efficient power converter for a wide range of applications. Its wide input voltage range, low operating costs, and high reliability make it a great choice for a number of different industries. With proper usage and care, this device can provide reliable performance for a long time.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
LRS40-15-900G | Bel Power So... | 2.77 $ | 1000 | AC/DC CONVERTER 15VEnclos... |
NMP CONFIGURABLE POWER SUPPLY 12Enclosed...
NMP CONFIGURABLE POWER SUPPLY 12Enclosed...
NMP CONFIGURABLE POWER SUPPLY 12Enclosed...
NMP CONFIGURABLE POWER SUPPLY 12Enclosed...
NMP CONFIGURABLE POWER SUPPLY 12Enclosed...
NMP CONFIGURABLE POWER SUPPLY 12Enclosed...