LS75-15

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC DC converters, such as the LS75-15, are widely used in industrial and consumer electronics. They allow for the conversion of alternating currents (AC) to direct currents (DC). The LS75-15 is specially designed for low power applications, such as battery chargers and voltage stabilizers, where efficiency is of the utmost importance.

The LS75-15 AC DC Converter is a two-terminal switching device which functions as a rectifier, providing conversion of alternating currents to direct currents. The desired conversion is obtained by an electronic switch which alters the voltage and current output from a fixed input. In the LS75-15, the electronic switch is controlled using a timer circuit.

At the core of the AC DC converter is an integrated circuit, commonly referred to as an IC. This IC responds to the input voltage and provides a regulated and stepped output voltage. The IC has three components: an oscillator, a counter circuit and a logic gate. The oscillator produces a timing signal which the counter circuit then divides so that the logic gate receives pulses at regular intervals.

The logic gate is responsible for controlling the switch which regulates the voltage and current output of the converter. When the logic gate is “on”, the switch is closed, allowing the full voltage from the input to the output. When the logic gate is “off”, the switch opens, blocking the input voltage and decreasing the output voltage. The flip-flop technique is used, meaning that the current state of the switch depends only on the current state of the logic gate.

The LS75-15 is a linear IC, which results in the output voltage being proportional to the input voltage. The output voltage can be adjusted by varying the values of the capacitor and resistor connected to the timer circuit. The device also features low power consumption, high stability and excellent load response.

The LS75-15 can be used in a wide range of applications, from battery chargers to motor control systems. It is also suitable for use in devices like hair dryers, electric shavers and walkman players which require low-power AC DC conversion. It is especially applicable for energy saving by controlling the amount of power drawn from the input source.

The LS75-15 is an efficient and cost effective AC DC converter which uses a timer circuit for switching and regulating the output voltage and current. Its low power consumption and excellent stability make it an ideal choice for applications with stringent energy requirements.

The specific data is subject to PDF, and the above content is for reference