LT1076HVIR#PBF

Voltage - Output (Min/Fixed):	2.5V
Base Part Number:	LT1076
Supplier Device Package:	D2PAK-7
Package / Case:	TO-263-8, D²Pak (7 Leads + Tab), TO-263CA
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C (TA)
Synchronous Rectifier:	No
Frequency - Switching:	100kHz
Current - Output:	2A (Switch)
Voltage - Output (Max):	35V
Series:	--
Voltage - Input (Max):	64V
Voltage - Input (Min):	8V
Number of Outputs:	1
Output Type:	Adjustable
Topology:	Buck, Boost, Flyback
Output Configuration:	Positive or Negative
Function:	Step-Up, Step-Down, Step-Up/Step-Down
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to LT1076HVIR#PBF:The LT1076HVIR#PBF is a DC-DC switching regulator designed and manufactured by Linear Technology. It is specifically designed to provide higher accuracy in wide range of voltage and current output applications. The design incorporates an architecture that simplifies the design of power systems with digital power management. It also provides a high level of accuracy and efficiency in applications with loads up to 30A and output voltages from 5V to 16V.The LT1076HVIR#PBF includes an internal synchronous rectification and offers features such as short circuit protection, over-current protection, input under-voltage protection and over-temperature protection. It also features a Power Good (PG) output. This output is used to indicate proper charging of the power systems battery. The LT1076HVIR#PBF provides an adjustable output voltage range from 0.4V to 16V and has a very low quiescent current of 100uA.Application Field:The LT1076HVIR#PBF is designed for use in a range of applications such as automotive, datacom and telecom, industrial, medical, aerospace and defense, consumer, and power management.Automotive: The LT1076HVIR#PBF can be used to power sensors, control modules and serve as an ECU power supply in automotive applications.Datacom, Telecom and Industrial: The device is designed to power high current requirements of datacom, telecom and industrial equipment such as modems, routers, printers, robotic systems and other industrial equipment.Medical: The device can be used for medical equipment power, such as patient monitoring systems, imaging systems and various other medical equipment.Aerospace and Defense: The LT1076HVIR#PBF is suitable for a range of aerospace applications such as on-board connectivity, navigation and communication systems.Consumer: The device is useful for consumer applications such as mobile phones, portable appliances and gaming systems.Power Management: The device is ideal for powering energy-efficient and silent systems including laptops, servers and desktop power supplies.Working Principle:The LT1076HVIR#PBF utilizes a synchronous buck converter to provide precise output voltage without the use of an opto-isolator. The device operates in a two-phase mode with fixed frequency and adjustable on-time. A voltage divider is connected across the output stage to provide the feedback voltage required for the conversion process. A high side MOSFET pulls high an output 0V during “on” times and a low side MOSFET pulls low an output 0V during “off” times. The voltage feedback loop is used to maintain an accurate output voltage.The device has low output ripple, a fast transient response, low input and output noise, and a high operating frequency. Additionally, the LT1076HVIR#PBF features a current limit protection that prevents the device from exceeding the current limit set by the external resistor or the device will short circuit protection. The device also benefits from additional protection features such as over temperature protection, over current protection, and over voltage protection.In addition, the device offers an output Power Good (PG) pin, which can be connected to indicate when the output voltage has stabilized and is ready to be used by the system. The PG pin will be low until the output voltage reaches 90% of the desired output voltage.Conclusion:The LT1076HVIR#PBF is a high performance DC-DC switching regulator designed and manufactured by Linear Technology. It features an internal synchronous rectification and delivers accurate output voltage in applications with loads up to 30A and a 0.4V to 16V adjustable output range. The device has a low quiescent current of 100uA and provides features such as short circuit protection, over-current protection, input under-voltage protection and over-temperature protection. It is designed to meet the needs of a range of applications such as automotive, datacom and telecom, industrial, medical, aerospace and defense, consumer and power management.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description