LT1224CS8#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LT1224CS8#TRPBF is a precision amplifier offering unity gain accuracy, low offset voltage and drift, low noise and excellent DC precision. It is a type of linear amplifier known as an instrumentation operational amplifier (I/O amp), which are designed to bridge between sensors and various types of processors. It can be used for both general purpose and instrumentation purposes for critical signal conditioning, although it is primarily used for precision buffering.

Design Features

The LT1224CS8#TRPBF features a high voltage gain of 10V/V, a large -3dB bandwidth of 900kHz, an offset voltage of 0.3mV, a common-mode rejection ratio of 111dB, and a quiescent current of 2.5mA. The input impedance is greater than 100 megaohms, and the output impedance is less than 10 ohms. It is built using a CMOS process and comes in the 8-pin TSSOP package with an operating temperature range of -40°C to +125°C.

Application Field

The LT1224CS8#TRPBF is suitable for a wide range of applications, from low-scale signal conditioning in consumer electronics to high precision measurements in various industrial applications. With its wide frequency response and low noise levels, it is particularly suitable for use in medical instrumentation, industrial devices, switch mode power supplies, and other high-precision applications.

The LT1224CS8#TRPBF can be used to provide buffering for various types of sensors, such as strain gauges, temperature sensors, and inertial sensors. It can also be used for precision analog-to-digital and digital-to-analog conversion and low-noise signal conditioning. Additionally, it can be used to boost the gain of low-level signals, as well as to isolate computer buses and other digital systems from electromagnetic disturbances.

Working Principle

The LT1224CS8#TRPBF is a single-supply instrumentation amplifier. The amplifier is designed on the principle of differential input and single-ended output signal using a single power supply. Its working principle is the same as a standard differential amplifier, but with one important difference; the addition of a third input signal (Vin LT) added to the two side-by-side inputs (Vin+ and Vin-).

When the LT input is connected to the midpoint of the two side-by-side input signals (Vin+ and Vin-), the amplifier is able to maintain a constant voltage gain over the entire range of both inputs, even if their levels change independently. By isolating the gains from each other and expanding their linear range, the resulting signal is much smoother, with reduced distortion.

The LT1224CS8#TRPBF also offers a range of power supplies, allowing the user to select the optimal supply voltage for the application. The device is protected against overload and short-circuits, while its input common-mode voltage range extends well below ground, allowing the user to utilize each input signal in as wide an input range as possible.

Conclusion

The LT1224CS8#TRPBF is a precision, low-cost amplifier offering unity gain accuracy, low offset voltage and drift, low noise and excellent DC precision. Its wide frequency response and low noise levels make it suitable for several types of applications, from low-scale signal conditioning to high precision measurements in various industrial and medical instrumentation. Additionally, its unique LT input and single power supply design offer increased linear range and reduced distortion, making it an excellent choice for precision buffering.

The specific data is subject to PDF, and the above content is for reference