LT1468CS8#TRPBF

Voltage - Input Offset:	30µV
Base Part Number:	LT1468
Supplier Device Package:	8-SO
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	0°C ~ 70°C
Voltage - Supply, Single/Dual (±):	±4.5 V ~ 15 V
Current - Output / Channel:	22mA
Current - Supply:	3.9mA
Series:	--
Current - Input Bias:	10nA
Gain Bandwidth Product:	90MHz
Slew Rate:	22 V/µs
Output Type:	--
Number of Circuits:	1
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LT1468CS8#TRPBF application field and working principle

Introduction

The LT1468CS8#TRPBF is a Monolithic Quad Operational Amplifier which offers very low power dissipation and wide bandwidth. Its 4 channels allow it to be used multi-functional and the low noise it generates make it the ideal choice for precise signal amplification. The LT1468CS8#TRPBF is commonly used in a wide range of applications from instrumentation, to audio signal processing, to medical and industrial automation. In this article, let’s look at the application field and working principle of the LT1468CS8#TRPBF.

Application Field

The LT1468CS8#TRPBF quad operational amplifier is incredibly versatile and can be applied in many industries. Commonly used in instrumentation and measurement systems, it provides excellent performance in audio and medical applications.

Instrumentation and Measurement Systems

The LT1468CS8#TRPBF can be used in instrumentation and measurement systems to provide precise voltage amplification and control of signals. The high common-mode rejection ratio and low offset voltage of the amplifier allow for accurate and reliable signal amplification. In addition, its high gain and wide bandwidth make it ideal for use in oscilloscopes and for waveform analysis.

Medical Applications

The LT1468CS8#TRPBF is also widely used in medical applications such as bio-medical instrumentation and medical imaging systems. Its low noise and low power dissipation make it an ideal choice for these applications. In addition, its 4 channels provide excellent signal isolation to prevent crosstalk.

Audio Signal Processing

The LT1468CS8#TRPBF is commonly used in audio equipment such as audio mixers and amplifiers. Its wide bandwidth and low noise allow for precise signal reproduction with minimal distortion. It can also be used to filter and amplify signals as well as to create a wide range of audio effects.

Industrial Automation

The LT1468CS8#TRPBF is also commonly used in industrial automation for precise voltage control. Its high common-mode rejection ratio and low power consumption make it the ideal choice for energy-efficient control systems. In addition, its wide bandwidth and low noise make it suitable for noise-sensitive industrial applications.

Working Principle

The LT1468CS8#TRPBF is a monolithic quad operational amplifier. It consists of four operational amplifiers (op-amps) which are connected in a differential amplifier configuration. This means that two op-amps are connected to a single input, allowing the device to amplify signals with a high common-mode rejection ratio.Each op-amp in the LT1468CS8#TRPBF has a differential pair of input transistors, a pair of output transistors, and noise cancellation circuitry. The differential pair of input transistors are used to compare the input signals and the output transistors are used to amplify the differences between them. The noise cancellation circuitry reduces the amount of noise generated by the device. The LT1468CS8#TRPBF is able to provide wide bandwidth and low noise because of its high slew rate. The LT1468CS8#TRPBF can amplify signals very quickly, allowing for accurate and precise signal processing even at high frequencies.The LT1468CS8#TRPBF is a versatile device which can be used in a wide range of applications. Its low power consumption, wide bandwidth and low noise make it the ideal choice for instrumentation, medical and audio applications. With its four channels, it can provide excellent signal isolation and precise voltage control. Understanding its working principle is essential for ensuring its optimal performance in any application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description