LT1468IS8#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LT1468IS8#TRPBF is a two-channel low-noise, precision, low-power instrumentation amplifier, buffered with an adjustable feedback gain of up to 20V/V. It is part of the Linear Technology family of products and operates in the instrumentation, OP amps, buffer amps and other related applications.

The LT1468IS8#TRPBF is designed to measure low-level signals within the range of 10mV to 10V peak-to-peak with a capacitively coupled input and is ideally suited for data acquisition, medical equipment, vibration analysis, motion control systems, and industrial instrumentation.

The LT1468IS8#TRPBF offers a wide input common-mode range of up to ±5V and configurable high-pass filters with cut-off frequencies of 0.2Hz, 1Hz, 10Hz, and 100Hz. Using built-in bias and offset currents, the device provides a wide signal source range of ±20V with a common-mode voltage up to ±12.5V. The LT1468IS8#TRPBF provides a reference voltage of ±1.25V or ±2.5V, adjustable from -20mV to +20V.

The LT1468IS8#TRPBF is a low-power instrumentation amplifier with a low supply current of 1mA at 5V and is protected against reversed supplies and power-down events through its Power-on Reset function. It offers a rail-to-rail output stage, which can drive up to 100mA into a resistive load.

The LT1468IS8#TRPBF operates with a gain of 0dB to 20V/V as selected with a resistor divider. A servo-loop allows the output to remain centered around the desired reference voltage, independent of temperature and other parameters.

The device also offers a high slew rate of 9V/µs and is capable of driving up to ±200mA loads. It provides excellent common-mode rejection ratio (CMRR) of 90dB with a gain bandwidth of 0.1MHz to 1MHz.

The LT1468IS8#TRPBF contains two-operational amplifiers and has a low distortion of 0.03%. It features excellent linearity, low offset voltage of 3mV, and is available in an 8-pin TSSOP package in two temperatures, -40°C to 85°C, or -40°C to 125°C.

The LT1468IS8#TRPBF is a low-noise, high-precision, low-power instrumentation amplifier, with wide common-mode range, low power consumption and a wide servo-loop. It also has Rail-to-rail output stage and high slew rate, making it ideal for a range of instrumentation, OP amps, buffer amps and other related applications.

The specific data is subject to PDF, and the above content is for reference