LT1963AEFE-2.5#PBF

Current - Output:	1.5A
Base Part Number:	LT1963
Supplier Device Package:	16-TSSOP-EP
Package / Case:	16-TSSOP (0.173", 4.40mm Width) Exposed Pad
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Protection Features:	Over Current, Over Temperature, Reverse Polarity
Control Features:	Enable
PSRR:	63dB (120Hz)
Current - Supply (Max):	120mA
Current - Quiescent (Iq):	1.5mA
Series:	--
Voltage Dropout (Max):	0.55V @ 1.5A
Voltage - Output (Max):	--
Voltage - Output (Min/Fixed):	2.5V
Voltage - Input (Max):	20V
Number of Regulators:	1
Output Type:	Fixed
Output Configuration:	Positive
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LT1963AEFE-2.5#PBF Application Field and Working Principle

The LT1963AEFE-2.5#PBF is a low dropout (LDO) voltage regulator used for a variety of applications. It is a linear voltage regulator that provides stable output in battery-powered circuits. This device provides reliable regulation with a wide input voltage range and minimal quiescent current to conserve battery life.The LT1963AEFE-2.5#PBF is a family of positive linear voltage regulators that use advanced CMOS technology to provide low dropout voltage and low power consumption. This voltage regulator is available in a range of fixed output voltages, including 2.5V, 3.3V, 5V, and adjustable versions.The LT1963AEFE-2.5#PBF offers high PSRR and low output noise, enabling it to provide low noise and stable power in high-frequency circuits. The device integrates a voltage reference and an error amplifier, and features an internal current limit and short-circuit protection to provide circuit protection.The LT1963AEFE-2.5#PBF has an input voltage range of 2.4V to 6V, making it suitable for a range of applications. The device is capable of supplying up to 100mA of output current and has an output voltage of 2.5V.The LT1963AEFE-2.5#PBF is designed to operate with an input voltage that is greater than the output voltage to ensure proper performance of the device. The dropout voltage (VDROP) is the difference between the input and output voltages, and the device is designed to maintain a minimum VDROP of 0.5V.The LT1963AEFE-2.5#PBF provides a low ripple and noise output. The PSRR of the device is approximately 70dB at 1kHz, which is sufficient for many applications. At 1MHz, the PSRR drops to approximately 60dB, which is good for noise-sensitive applications. The output noise is typically under 10µVrms, making it suitable for portable applications that require low-noise output.The LT1963AEFE-2.5#PBF features an internal soft-start feature which ramps up the output voltage on start-up to prevent inrush current. The device is also thermal shutdown-protected, and shuts off when the die temperature exceeds a certain threshold.The LT1963AEFE-2.5#PBF is a versatile, low-power voltage regulator for a variety of applications. It provides stable output with low ripple and noise, and is capable of supplying up to 100mA of output current. The device is designed to provide a minimum dropout voltage, and features an internal soft-start and thermal protection to ensure reliable operation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description