LT3756EUD-1#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

LT3756EUD-1#TRPBF is an advanced power management IC (PMIC) designed for the control and management of light-emitting diode (LED) devices. It offers an integrated solution to the control and management of LEDs while delivering high efficiency, stable current, and excellent heat dissipation. This PMIC is capable of providing a maximum output current of 1.5A to each channel, making it ideal for powering arrays of low-power LEDs.

Application Field of LT3756EUD-1#TRPBF

The LT3756EUD-1#TRPBF can be used in a variety of LED applications, including outdoor LED lighting and flash-based LED applications. In outdoor LED lighting, the PMIC can be used to control a series of LED light poles, providing a reliable and efficient current source to each pole. For flash-based LED applications, such as camera flashes and automotive headlamps, the PMIC can be used to quickly and accurately switch between two output current levels, allowing for a wide range of illumination levels.

Working Principle

The LT3756EUD-1#TRPBF uses a Constant-Current / Constant-Power (CC/CP) control loop to accurately regulate the output current and the output power of the supplied LEDs. The output current is regulated by a sense pin, with the voltage across this pin being monitored and compared to a reference voltage. When the voltage across the sense pin exceeds the reference, the output current is reduced until it matches the reference. When the voltage across the sense pin is lower than the reference, the output current is increased until it matches the reference.

The output voltage is controlled by internal feedback circuitry, which compares the output voltage to a reference voltage. If the output voltage is above the reference, the output current is reduced; if the output voltage is below the reference, the output current is increased.

The LT3756EUD-1#TRPBF also supports three separate modes of operation: direct PWM dimming, PWM/analog dimming, and constant on/off. In direct PWM dimming, the PWM signal is applied directly to the PWM input of the PMIC. The duty cycle of the PWM signal is used to control the brightness of the LED. In PWM/analog dimming, the PWM signal is amplified to control an analog dimming signal, while in constant on/off, the LED is either turned on or off depending on the logic state of the enable signal.

The LT3756EUD-1#TRPBF also provides a slew rate control feature, which allows the user to control the rate at which the output current changes. By adjusting the slew rate control, the rise and fall times of the output current can be adjusted, allowing for faster response times or smoother transitions.

Conclusion

The LT3756EUD-1#TRPBF is an advanced PMIC designed for the control and management of LEDs. It offers a range of features and benefits, including high efficiency, stable current, and excellent heat dissipation. This PMIC also provides a variety of outputs, such as direct PWM dimming, PWM/analog dimming, and constant on/off. In addition, it offers slew rate control, allowing users to control the rate at which the output current changes to better manage their LED devices.

The specific data is subject to PDF, and the above content is for reference