LT3756EUD#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LT3756EUD#PBF is a high quality, efficient and reliable power management integrated circuit (PMIC) designed for LED Drivers applications. The LT3756EUD#PBF employs a multi-level architecture, allowing for more efficient use of power, and a built-in overvoltage protection, ensuring the safety and reliability of the circuit. The PMIC can be used for applications such as driving multiple high power LEDs with a small signal input from a microcontroller, and for sustaining constant-current outputs. The LT3756EUD#PBF operates from a wide input range of 2.3 V to 18 V and can deliver up to 2.5 A of output current at 10 V, with a programmable current limit, and very low dropout voltage. The PMIC also features a programmable switching frequency up to 1.1 MHz, allowing for optimal use of power, and fast response times. Additionally, the switching frequency can be set to a low frequency of 20 kHz, providing the lowest possible EMI interference. The LT3756EUD#PBF has integrated MOSFET drivers, allowing for advanced configurations in LED drivers applications. It includes both logic inputs and analog inputs for independent control of each LED output. This feature allows for multi-level dimming of LEDs for improved efficiency. Furthermore, the PMIC also provides programmable transitions between levels using a PWM signal or an analog voltage. The PMIC also integrates a thermal shutdown mechanism that provides protection from overheating. The LT3756EUD#PBF employs two separate channels for driving multiple high power LEDs from a single device. The IC has one channel (A) connected to an external inductor and an external boost diode, and the other channel (B) connected to an external inductor and an external buck diode. Through the use of these two channels, the PMIC can be used to drive multiple high power LEDs in series or parallel. The working principle of the LT3756EUD#PBF PMIC is fairly straightforward. The integrated circuits take an input signal and convert it into a power output to drive the LEDs. The input signal is converted into a voltage output by the PMIC’s internal control circuitry, and this voltage change is then used to actuate the push-pull output stage. The output stage then provides current to the LEDs, resulting in an increase in brightness. The LT3756EUD#PBF PMIC is designed to be a high quality, efficient and reliable power management integrated circuit for driving multiple high power LEDs from a single device.

The specific data is subject to PDF, and the above content is for reference