LT5520EUF#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LT5520EUF#PBF is a low-noise, high linearity, double-balanced mixer in a 8-pin TSSOP package designed for Surface Mount Technology (SMT) assembly. It has high selectivity against undesired local oscillator (LO) harmonics and is capable of delivering good performance over a wide range of application frequency and power levels. This mixer is best suited for a wide range of applications, including RF/microwave communication/navigation, medical, instrumentation, consumer, and military systems.

This device is capable of providing a wide dynamic range, making it an ideal solution for applications such as Frequency Hopping Spread Spectrum (FHSS), Frequency Division Multiple Access (FDMA), Code Division Multiple Access (CDMA), as well as Bluetooth, GPS, digital cellular, mobile telephony, and high data rate communication systems. It can also be used for applications such as ground-to-air radios, VHF band radios, automotive applications, and land mobile radio (LMR) applications.

The LT5520EUF#PBF is a double balanced mixer that provides broad conversion gain and good linearity. It features a low noise figure of 4.5 to 6 dB, high LO third order intercept point (LOIP3) of +25 to +30 dBm, and output third order intercept point (IP3) of up to +46 dBm. This low noise figure (NF) ensures maximum sensitivity and response to a wide range of input signals. The excellent linearity makes signal restoration easier and minimizes signal distortion.

The LT5520EUF#PBF operates from a single supply voltage of 4.5 V (±2.5 V) and requires an external matching network. The multilayer design ensures high spurious free dynamic range (SFDR), low insertion loss and excellent return loss. The device operates over a wide temperature range (-40°C to +85°C junction temperature), making it suitable for various environmental conditions.

The working principle of the LT5520EUF#PBF is based on double balanced effect. It is designed to provide maximum efficiency, low noise, high linearity and low signal distortion. The double balance effect is produced by introducing two signal inputs, either balanced or unbalanced, with a similar gain and phase response in both connected circuits. This loaded effect amplifies the signals from both inputs and combines them in a single output. The output of the device is then amplified and filtered to produce the desired output signal.

The LT5520EUF#PBF features two RF ports: an input port and an output port. The input port is typically connected to an antenna or a signal generator and the output port is connected to an amplifier, filter or other processing circuitry. The input port is also used to feed a low-voltage DC bias to the mixer. The bias voltage sets the amplifier’s operating point and helps to minimize distortion. The output port provides the amplified and filtered signal, which is often further processed by other components.

The LT5520EUF#PBF is part of the RF mixers category. Mixers are non-linear devices that convert a signal from one frequency to another. Mixers offer an efficient way to transfer the energy from one frequency to another, in order to reduce the noise and improve the signal to noise ratio of the system. Mixers also have the ability to convert a signal to multiple frequencies, in order to support multiple applications. RF mixers are able to provide excellent linearity, low noise figure, high conversion gain and high selectivity for applications such as cell phones, satellites, and military communications.

In conclusion, the LT5520EUF#PBF is an advanced, low-noise double-balanced mixer, developed for SMT assembly, which is suitable for various application fields such mobile telephony, GPS, digital cellular, ground-to-air radios, VHF band radios, automotive applications, and land mobile radio (LMR). It provides efficient conversion gain, good linearity, high LOIP3 and IP3, low noise figure and wide dynamic range. This device is part of the RF mixers category and can be used for various applications.

The specific data is subject to PDF, and the above content is for reference