LT6201CS8#PBF

Current - Input Bias:	23µA
Base Part Number:	LT6201
Supplier Device Package:	8-SO
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	0°C ~ 70°C
Voltage - Supply, Single/Dual (±):	2.5 V ~ 12.6 V, ±1.25 V ~ 6.3 V
Current - Supply:	20mA
Voltage - Input Offset:	2.5mV
Series:	--
Gain Bandwidth Product:	165MHz
Slew Rate:	50 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	2
Amplifier Type:	Buffer
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

LT6201CS8#PBF is an instrumentation amplifier (IA) used in various linear applications such as medical instrumentation and automation. IA amplifiers enhance signals that have low-level inputs, wide bandwidth, and high-input impedance. This type of amplifier is typically used to enhance small signals that are difficult to measure accurately, as it can provide high input impedance, low distortion, and wide bandwidth.LT6201CS8#PBF is a high-performance, low-cost, low-power instrumentation amplifier with a rail-to-rail output stage. It features an input noise voltage of 2nV√Hz and a low input bias current of 0.5pA. The amplifier is designed to work with low-power supplies, ranging from 3V up to 25V, and can operate over a temperature range of -40°C to 85°C. The device is fully specified to operate in temperatures from 0°C to 250°C.The LT6201CS8#PBF amplifier is commonly used for applications such as medical instrumentation, process control, and high-precision industrial automation. It is a versatile device that can be used for both transimpedance and high-gain amplification applications.The LT6201CS8#PBF works in three main stages: the operational-amplifier (op amp) stage, the buffer stage, and the gain stage. The op amp stage is the heart of the amplifier, providing its power and accuracy. The amplifier\'s op amp stage consists of two input amplifiers, which are connected in a differential configuration. The gain of the amplifier is determined by the ratio of resistors between the two inputs.The buffer stage is responsible for driving the amplifier outputs. This stage consists of a voltage follower amplifier, which is connected to the op amp stage and provides a high output impedance and low-noise characteristics. The buffer stage also contains an operational-comparator amplifier, which buffers the amplifier outputs.The gain stage is responsible for controlling the gain of the amplifier. It consists of two separate op amps, one of which acts as a high-gain phase-shifted gain amplifier and the other as an inverting amplifier. The gain of the amplifier is controlled by the unity-gain feedback loop between the two gain amplifiers.The LT6201CS8#PBF is a versatile instrumentation amplifier designed for applications requiring a high level of accuracy and precision. With its three-stage architecture, high output impedance, and low input bias current, the LT6201CS8#PBF is a powerful and reliable solution for various linear applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description