LT6211CDD#PBF

Voltage - Input Offset:	1mV
Base Part Number:	LT6211
Supplier Device Package:	10-DFN (3x3)
Package / Case:	10-WFDFN Exposed Pad
Mounting Type:	Surface Mount
Operating Temperature:	0°C ~ 70°C
Voltage - Supply, Single/Dual (±):	3 V ~ 12 V, ±1.5 V ~ 6 V
Current - Output / Channel:	75mA
Current - Supply:	6mA
Series:	--
Current - Input Bias:	13.5µA
-3db Bandwidth:	200MHz
Slew Rate:	700 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	2
Amplifier Type:	Current Feedback
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LT6211CDD#PBF is an operational amplifier (op amp) in the form of a dual monolithic high-speed, low-power amplifier. As an instrumentation op amp, it provides excellent performance as an analog signal conditioner, especially for high-precision measurement, control and signal conditioning purposes. As a buffer amp, it is capable of buffering input voltage swings of greater than 10V and outputting signals at rates up to 50kHz—making it ideal for driving high-impedance sensors and digital-to-analog converters (DACs). This application note will provide an overview of the key features of the LT6211CDD#PBF, as well as its working principles, application fields, and advantages.

Overview of LT6211CDD#PBF

The LT6211CDD#PBF is a dual, low-power, monolithic, high-impedance buffered op amp. It is a high-impedance device that can operate over a 4V to 10V range and offers a unity-gain bandwidth of 4.2MHz. It provides both negative and positive gain and is capable of driving high-impedance sensors, making it ideal for analog signal conditioners. It also offers a wide range of operating temperature ranges (from -40°C to 120°C) and is designed to meet various industrial standards. It is available in 8-pin SOIC and 8-pin VQFN packages.

The LT6211CDD#PBF offers low power consumption with a supply current of 4mA and quiescent current of 6mA. It helps users reduce their overall system power consumption and offers improved reliability. Additionally, the device has low output offset voltage (10mVmax) and excellent common-mode rejection ratio (CMRR) of 70db. This allows for better performance compared to conventional amplifiers with a single-ended input.

In addition to its high-impedance buffering capabilities, the LT6211CDD#PBF features adjustable gain and differential inputs. The device can amplify both AC and DC signals up to a maximum gain of 24dB. This provides users with improved SNR and dynamic performance. The adjustable gain also helps users adjust the signal level in their applications.

LT6211CDD#PBF Working Principles

The LT6211CDD#PBF is based on the classic non-inverting op amp configuration, where the output is an amplified version of the input signal. The design utilizes differential input stages and high-impedance buffers to enable high-speed operation with low output noise and crosstalk. The device employs a “sampling” technique, where the output is taken from one side of the differential input stages, so that the output voltage is an amplified version of the difference between the two sides of the differential input stage. This enables high-precision measurements, controls, and signal conditioning.

LT6211CDD#PBF Applications

The LT6211CDD#PBF is ideally suited for use in a wide range of applications, including high-precision measurement and control, industrial process control, and audio signal conditioning. It is also used as a buffer or isolator in power systems, where its high-impedance buffers and differential inputs make it ideal for driving both high-impedance and low-impedance loads. The device’s high-speed operation, low output noise and crosstalk, and adjustable gain make it ideal for signal conditioning applications.

Advantages of LT6211CDD#PBF

The LT6211CDD#PBF offers a range of advantages over conventional amplifiers, especially in terms of performance and cost. The device is easy to use, and its adjustable gain, low output noise and crosstalk, and high-impedance buffers make it ideal for a wide range of signal conditioning applications. The device also offers low power requirements and excellent common-mode rejection ratio (CMRR). This helps users reduce their system power consumption while maintaining signal integrity.In addition, the LT6211CDD#PBF is a cost-effective solution for a variety of applications, as it offers an excellent price/performance ratio. The device is available in a range of packages for a variety of applications and in large quantities for high-volume applications. Its cost-effectiveness makes it an attractive option for applications that require high-precision measurements and signal conditioning.

In conclusion, the LT6211CDD#PBF is a versatile, low-power, high-impedance buffered op amp that can be used in a wide range of applications, especially in high-precision measurement, control, and signal conditioning. It features excellent performance, adjustable gain, low power consumption, and a low cost. Its excellent features make it an attractive option for the cost-sensitive user.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description