LTC1164-7CSW#PBF

Series:	--
Packaging:	Tube
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Filter Type:	Linear Phase, Low Pass Switched Capacitor
Frequency - Cutoff or Center:	100kHz
Number of Filters:	1
Filter Order:	8th
Voltage - Supply:	4.75 V ~ 16 V, ±2.375 V ~ 8 V
Mounting Type:	Surface Mount
Package / Case:	16-SOIC (0.295", 7.50mm Width)
Supplier Device Package:	16-SOIC
Base Part Number:	LTC1164

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LTC1164-7CSW#PBF Application Field and Working PrincipleThe LTC1164-7CSW#PBF is part of a series of low-power 7-bit "D/A converters" from Linear Technology Corporation. It is a versatile, low-cost digital to analog converter that uses Metal Oxide Semiconductor Field-Effect Transistor (MOSFET) devices to provide output signals with excellent linearity and low distortion. The converter features a wide dynamic range with high accuracy, making it suitable for use in a variety of applications. The LTC1164-7CSW#PBF comes with a range of features, including low output power and excellent temperature stability. It produces a voltage output range of 0 V to 6 V, and its peak-to-peak distortion is typically less than 0.1%. The converter provides a single-ended output voltage that can be adjusted with two external resistors.The LTC1164-7CSW#PBF also provides a low-power interface filter, which helps to minimize distortion caused by external components, such as power sources and other noise sources. The filter is an active filter that is thermally compensated to maintain accurate response at high and low frequencies.The active filter of the converter also helps to reduce errors caused by transient signals. These errors can occur in the analog-to-digital converter, which can lead to inaccurate readings. The active filter allows the converter to accurately measure the analog signals even when there are high-frequency transients present.The LTC1164-7CSW#PBF is suitable for use in numerous applications, such as digital audio systems, instrumentation, medical imaging, and high speed telecom systems. In these applications, high accuracy and linearity are important for obtaining accurate results. The converter is also appropriate for industrial control systems and automotive applications as it provides many benefits, such as its excellent temperature stability, low power requirement, and wide dynamic range. Additionally, the converter is small and lightweight, making it an ideal choice for systems where space and weight are critical factors.The working principle of the LTC1164-7CSW#PBF is quite simple. The converter uses a series of internal MOSFET devices to produce an output voltage, which is controlled by an external resistor network. The converter has a number of inputs, including a 6.5 V reference voltage, a 3.3 V DAC input, a 2.5 V analog-to-digital converter input, and a +7.5 V power supply. The LTC1164-7CSW#PBF produces an output voltage that is proportional to the input signal. The output signal is amplified and filtered by the active filter, making it suitable for use in many different applications. The converter also has an on-chip comparator for monitoring the DAC output signal and alerting when the DAC output goes above or below the programmed output voltages. The LTC1164-7CSW#PBF is a versatile, low-cost digital-to-analog converter that is suitable for a variety of applications. It offers excellent linearity and low distortion, as well as a wide dynamic range and low output power. The active filter makes it suitable for a range of applications, including digital audio systems, instrumentation, medical imaging, and high speed telecom systems. The converter also features an on-chip comparator that alerts of DAC output voltage changes.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description