LTC1329CS8-50#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC1329CS8-50#TRPBF is a Data Acquisition, Digital to Analog converter (DAC) that is sampling at 8 bits and allowing for a 10 MHz bandwidth. It is powered by a single 5 V supply from 0C to 70C and has a 4 mA output current range. It features on board shutdown logic, and a useful galvanically isolated output. It is also RoHS compliant.

The advantages of this DAC include its high grade 0.1% linearity, a maximum throughput of 10 MS/sec, and a low drift temperature coefficient. It is suitable for use in low-power analog applications, such as systems that require automated balancing, adjustment, and control in order to maintain set points. It is also well suited for mixed-signal embedded systems that require multiple proportional and continuous analytical measurements.

LTC1329CS8-50#TRPBF\'s signal conditioning circuit consists of two current sources and two voltage references, connected in an RC (current-voltage) feedback configuration. The two current sources are driven by two separate current mirrors, where one mirror provides positive current and the other one provides negative current. The two voltage references are used to both bias and clip the signal. If a signal exceeds either reference, the output is clipped at that level. The signal is then conditioned with a low-pass filter, which eliminates unwanted signal noise, and a buffer amplifier is used for voltage amplification. Finally, the signal is converted to an analog component by a D/A (digital-to-analog) converter.

The purpose of the DAC is to take a digital signal and convert it into an analog signal that can be used in analog circuitry. The DAC is used in a variety of applications such as ADCs, data acquisition, communications, control systems, and instrumentation systems. It can also be used for phase locked loops and voltage-controlled oscillators. The DAC\'s precision and accuracy are particularly important for digital systems, as a digital signal will be degraded if it is not properly translated into an analog signal.

The LTC1329CS8-50#TRPBF DAC is a great choice for applications that require precision analogue output. Its features of low power consumption, high linearity and low temperature drift make it ideal for systems that demand accurate and reliable outputs. The DAC is well suited for operation in low noise and low power environments, as well as in mixed-signal embedded systems.

The specific data is subject to PDF, and the above content is for reference