LTC2066IS5#TRMPBF

Current - Input Bias:	5pA
Base Part Number:	LTC2066
Supplier Device Package:	TSOT-23-5
Package / Case:	SOT-23-5 Thin, TSOT-23-5
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply, Single/Dual (±):	1.7 V ~ 5.25 V
Current - Supply:	7.5µA
Voltage - Input Offset:	1µV
Series:	--
Gain Bandwidth Product:	100kHz
Slew Rate:	0.0175 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	1
Amplifier Type:	Zero-Drift
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LTC2066IS5#TRMPBF application field and working principle

Linear-Amplifiers – Instrumentation, OP Amps, Buffer Amps

The LTC2066IS5#TRMPBF instrumentation amplifier from Linear Technology is a low noise and wide bandwidth instrumentation amplifier that can be used for a variety of applications. It is a single-channel, voltage-output instrumentation amplifier with a gain range of 1V/V to 65.5V/V in 1mV steps and a slew rate of 6V/μs. It is available in 8-pin MSOP and SOIC packages.The LTC2066IS5#TRMPBF instrumentation amplifier focuses on the following areas:

Applications

The LTC2066IS5#TRMPBF is suitable for a variety of applications, such as data acquisition systems, teledata receivers, medical instrumentation, precision strain gage and thermocouple signal conditioning, as well as automobile and industrial control systems.

Advantages

With its low noise, wide bandwidth, high common-mode rejection ratio, and low power consumption, the LTC2066IS5#TRMPBF is the ideal instrumentation amplifiers for a wide range of applications. It has a low input offset voltage of 15μV maximum and a maximum input common-mode voltage range of ±13.3V.

Features

The LTC2066IS5#TRMPBF has several key features, such as full scale gain from 1V/V to 65.5V/V in 1mV steps, a 10MHz bandwidth, and a 0.01V/μs slew rate. It also has a low-noise architecture that provides a 5nV/√Hz noise level, and an enhanced input common-mode range that can handle input signals up to ±18V. There is also a power-on reset circuit that ensures the amplifier always starts up in the correct conditions.

Working Principle

The LTC2066IS5#TRMPBF operates on the principles of an instrumentation amplifier. It takes an input signal, amplifies it, and then outputs the amplified signal. The amplifier measures the difference between its two input signals and amplifies it according to the selected gain. The amplifier uses three op-amps in a non-inverting configuration to provide accurate gain selection and gain setting.The input offset voltage (Vos) is the voltage difference between the two input terminals. If the input terminals are not connected, the Vos will be zero. The common-mode rejection ratio (CMRR) is the degree to which input signals of different voltages are rejected. The amplifier has a CMRR of 80dB, which ensures a high degree of noise suppression and accurate gain setting.

Conclusion

The LTC2066IS5#TRMPBF instrumentation amplifier from Linear Technology is a low-noise, wide-bandwidth instrumentation amplifier ideal for a wide range of applications. It has a gain range of 1V/V to 65.5V/V in 1mV steps, a 10MHz bandwidth, a 0.01V/μs slew rate, and an enhanced input common-mode range. Combined with its low noise, wide bandwidth, high common-mode rejection ratio, and low power consumption, the LTC2066IS5#TRMPBF instrumentation amplifier is an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description