LTC2180CUP#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Within the Data Acquisition - Analog to Digital Converters (ADC) subsection, the LTC2180CUP#TRPBF is a high-performance, single-channel, low-power fully differential delta-sigma analog-to-digital converter (ADC). It allows for a wide range of applications and industries to benefit from its impressive specifications and features.

The LTC2180CUP#TRPBF is a low-power device (only 390µW at the minimum throughput) and is available in the 5x5mm 32-pin QFN package. This makes the device an ideal choice for applications that require low-power consumption and small form-factor parts. The LTC2180CUP#TRPBF also contains a power scaler, a choice of output formats, and a low-noise reference input.

The primary application field for the LTC2180CUP#TRPBF is medical imaging and consumer systems. This is thanks to its combination of features, such as low-noise performance and low power consumption, which allow it to process high-quality signals and images with minimal disruption.

The LTC2180CUP#TRPBF continuously samples the input signal and performs successive samplings of the differential input signal with a near zero dead time. The input is then converted to a differential digital signal through a delta-sigma modulator and low-pass filters. The output digital data can be read out asynchronously at data rates up to 500kHz, and is available in two formats, CMOS and LVDS.

Once the differential digital data is generated, it is averaged over two cycles and stored in a Here, the data is stored in an output data buffer ready for readout. Once the readout is completed, the LTC2180CUP#TRPBF is ready to begin the next conversion cycle and the output data is settled onto the output pins.

Using an SPI-like interface, the conversion data can be readily accessed over a semiconductor chip. The data is provided in two formats: a two\'s-complement and linear offset binary format. To reduce possible ADC disruptions, the LTC2180CUP#TRPBF has an output glitch cycle time of 80µs and the supply voltage can range from 3V to 3.6V.

The LTC2180CUP#TRPBF is designed to operate in environments with high amounts of noise with its dynamic range being greater than 71dB. Its differential input referred noise is also very low and is typically below 1.9nV/√Hz. It also has high-immunity to power supply, clock supply, and clock jitter noise, allowing it to produce reliable, low-noise results in a variety of systems.

The LTC2180CUP#TRPBF can be used to accurately convert differential analog signals into digital signals. Its low power consumption, small form factor, and high-performance make it an ideal choice for a wide range of applications, such as medical imaging, consumer systems, and more.

The specific data is subject to PDF, and the above content is for reference