LTC2324IUKG-12#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC2324IUKG-12#TRPBF is a 16-bit, high speed, low power, SAR (Successive Approximation Register) ADC (Analog to Digital Converter), and is used in many data acquisition applications. It has the advantage of being able to convert input signals ranging from 0 to 3.3V, at up to 200kSPS (Kilo Samples Per Second).

The LTC2324IUKG-12#TRPBF has a maximum power consumption of 7.25 mW and a noise figure of -57dBFS/-60dBFS (single-ended) from 50 kHz to 3 MHz. It has an integrated reference of 1.2V, which can be adjusted using external resistors to set the reference voltage within 2% accuracy. The ADC also features an I²C/SMBus digital interface and is available in an 8-pin QFN package.

The LTC2324IUKG-12#TRPBF uses a SAR (Successive Approximation Register) architecture to convert analog signals to a digital representation. This architecture consists of two main blocks - an analog front end, which converts the input voltage into a digital output, and a digital control system that controls the internal workings of the converter. The main advantage of SAR architecture is that it offers better performance than other ADC architectures in terms of power consumption, accuracy and speed.

The LTC2324IUKG-12#TRPBF\'s analog front end uses a multi-step conversion process to convert the input voltage into a digital output. It first samples the input voltage, then performs an A/D conversion of the sampled data, and finally performs an Analog to Digital conversion. This process is repeated for each input voltage, until the digital output is generated. The A/D converter uses a combination of high speed comparators and low power clock pulse generator, to achieve fast and accurate conversion.

The digital control system of the LTC2324IUKG-12#TRPBF is based on a controller chip that allows the user to program the reference voltage, the sample rate and other parameters. Through the use of this controller chip, it is also possible to control the power consumption, accuracy and signal-to-noise ratio of the converter. The ADC has an integrated clock generator and a low power standby mode that allow it to operate in an efficient manner, reducing the overall power consumption.

In summary, the LTC2316IUK-12#TRPBF is a 16-bit, high speed, low power SAR ADC, which is suitable for many data acquisition applications. Its features include a large input voltage range from 0 to 3.3V, high speed of up to 200kSPS, low power consumption, integrated reference of 1.2V, I²C/SMBus digital interface, and an 8-pin QFN package. It is capable of achieving excellent performance with low power consumption, high speed and accuracy, making it an ideal solution for many data acquisition applications.

The specific data is subject to PDF, and the above content is for reference