LTC2325IUKG-14#PBF

Number of A/D Converters:	4
Base Part Number:	LTC2325
Supplier Device Package:	52-QFN (7x8)
Package / Case:	52-WFQFN Exposed Pad
Operating Temperature:	-40°C ~ 85°C
Features:	Simultaneous Sampling
Voltage - Supply, Digital:	3.13 V ~ 3.47 V, 5V
Voltage - Supply, Analog:	3.13 V ~ 3.47 V, 5V
Reference Type:	External, Internal
Architecture:	SAR
Series:	--
Ratio - S/H:ADC:	1:1
Configuration:	S/H-ADC
Data Interface:	LVDS - Parallel, SPI
Input Type:	Differential
Number of Inputs:	4
Sampling Rate (Per Second):	5M
Number of Bits:	14
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC2325IUKG-14#PBF is an analog-to-digital converter (ADC) that processes high-resolution, low-power differential input signals. The device offers 14-bit resolution and a 200ksps throughput. It also features a decimation filter that has adjustable corner frequency, enabling it to fit the input signal bandwidth and reject adfial low-frequency noise. The dynamic range of the converter is up to -161dBFS, making it suitable for high-accuracy measurements. Developed by Linear Technology, the LTC2325IUKG-14#PBF is primarily used in medical and industrial applications such as gas and pressure sensors, ultrasound scanners, and wind turbine monitors, as well as in test and measurement equipment.The LTC2325IUKG-14#PBF is a single channel device with a differential input structure. The analog differential signanl is connected to the negative and positive input pins. The negative input pin is also connected to an adjustable resistor that allows the user to program the input voltage range. The input voltage range can be adjusted over a span of [-VREF1 to VREF1]. The synchronous clock can be used to clock data into the converter. The FSYNC pin enables synchronization with other input sources or other LTC2325IUKG-14#PBF converters.The device has two components – the asynchronous decimation filter and the sampling ADC. The decimation filter is a low-pass infinite-impulse-response (IIR) filter that rejects unwanted lower frequency components of the input signal to improve the bandwidth of the signal and reduce noise. The filter supports adjustable corner frequency, enabling it to customize the input signal bandwidth. The decimation filter receives the differential input signal, amplifies it and then sends the amplified signal to the sampling ADC. The sampling ADC is a 14-bit, Aperture-Coupled Differential Conversion (ACDC) ADC. It supports input frequency rates up to 400KHz. This ADC samples the incoming signal and converts it into a digital representation. The device has low integral nonlinearity and differential nonlinearity, allowing for a high degree of accuracy. The output of the device is a 14-bit Parallel Data Bus, which is latched so that the user can read the data from the data bus.The LTC2325IUKG-14#PBF is a low-power, high-resolution data acquisition ADC device. The device can process high-resolution input signals with a wide range of programmable input voltage ranges, making it suitable for a variety of applications. It is also quite accurate, with a low integral nonlinearity and differential nonlinearity. Combined with the adjustable corner frequency of its decimation filter, this device provides a high-precision solution for medical, industrial, and test and measurement applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description