LTC2365CTS8#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digital Converters (ADC) is a field of technology that allows electrical and electronic signals to be converted from analog form to digital form. This is especially important in the development of communication and computing technologies. The LTC2365CTS8#TRPBF is an example of a dedicated chip that falls within this field and is used to perform analog-to-digital conversion.

The LTC2365 is an 8-bit analog-to-digital converter that is ideal for high speed, low power applications. It supports a wide input range from 0 to 7.3 V and offers an impressive 23-bit conversion resolution. The fast throughput of the LTC2365 allows for rate conversion up to 150 kHz for digitizations with greater accuracy and faster interrupt response. The power requirements for the LTC2365 are also quite low, with a maximum of 350 μA/channel in 8-channel mode and 300 μA/channel in single-channel mode.

The LTC2365 uses successive approximation architecture to ensure accuracy and minimize conversion time. The architecture consists of a comparator and a successive-approximation register (SAR). The ADC communicates with the host system using a Serial Peripheral Interface (SPI) to reduce the pin count.

The LTC2365 has a high-speed, low-power SAR plus reference architecture that makes it suitable for a variety of applications. It can measure low-frequency signals for closed-loop control, process fast-moving signals for data acquisition, and quickly measure phase-locked loop (PLL) frequencies in communication systems.

The LTC2365 also has a number of features designed to improve its accuracy and reliability. One of these features is the built-in reference buffer, which eliminates the need to externally buffer a reference voltage. This reduces system complexity and improves the overall accuracy of the conversion. The device also features an internal digital filter, temperature compensation, and a digital output idle state which increases EMI performance.

The LTC2365 is an 8-bit analog-to-digital converter that is ideal for high speed, low power applications. It is a dedicated chip specifically designed for data acquisition and analog-to-digital conversion. It has a wide input range from 0 to 7.3 V and an impressive 23-bit conversion resolution, which makes it suitable for a variety of applications. It also has a number of features that improve accuracy and reliability, such as a built-in reference buffer, an internal digital filter, temperature compensation, and a digital output idle state.

The specific data is subject to PDF, and the above content is for reference