LTC2906CTS8#TRPBF

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Multi-Voltage Supervisor
Number of Voltages Monitored:	2
Output:	Open Drain or Open Collector
Reset:	Active Low
Reset Timeout:	140 ms Minimum
Voltage - Threshold:	2.5V, 3.3V, 5V, Adj
Operating Temperature:	0°C ~ 70°C (TA)
Mounting Type:	Surface Mount
Package / Case:	SOT-23-8 Thin, TSOT-23-8
Supplier Device Package:	TSOT-23-8
Base Part Number:	LTC2906

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - Supervisors PMIC stands for Power Management Integrated Circuit, and Supervisors are single, pinned integrated circuits the primary application of which is to detect particular conditions or states and then trigger a response. This can be done by assert a specific logic level for each pin, often in the form of a reset signal. PMIC supervisors are available in a variety of form factors and functions from various manufacturers, often with a wide selection of operating parameters to ensure the ideal product for a given application. The LTC2906CTS8#TRPBF is a compact, low-power supervisor intended to operate in all PMIC systems. By monitoring two independent supply voltages, this supervisor can detect an under-voltage (UV) or over-voltage (OV) condition and generate a reset/interrupt response. This allows the S/PDIF interface or other circuitry connected to the supervisor to take corrective action in the event of an abnormality. It is ideal for the system protection applications, audio/video systems, programmable logic controllers, and intelligent system designs.The LTC2906CTS8#TRPBF is available in a 5-pin SOT-23 package and is powered by a single 3.3V or 2.7V supply. It draws a current of 1.5mA which is typically sufficient for most applications. The operating temperature range of this device is from -40C to +85C. The working principle of the LTC2906CTS8#TRPBF supervisor is based on two comparators that monitor two supply voltages, a Vcc voltage and a Bias voltage. A supply threshold can be set such that when either of the two voltages detects an over/under voltage condition, the output goes to “high”, thus indicating an abnormality. This output can then be used to implement action to recover the system. The comparators can be configured to be in a latching or a “non-latching” mode, depending on the application requirement. The LTC2906CTS8#TRPBF has the following features that make it suitable for a host of applications:• Two voltage detection channels for each comparison;• Low power consumption and wide operating temperature range;• Selectable latching or non-latching actions;• Interrupt and reset output functions;• Open-drain power-ON-reset output.All of the above-mentioned features result in the LTC2906CTS8#TRPBF being an ideal power-management product for applications requiring supervisor and reset functions. The ability to switch between latching and non-latching modes makes this supervisor suitable for any situation, while the robust design allows it to withstand temperatures ranging from -40C to +85C, allowing it to perform reliably in harsh environments. In conclusion, the LTC2906CTS8#TRPBF power management supervisor is an ideal solution for a variety of applications requiring ultra-reliable under/over-voltage protection. By incorporating two independent comparators that can switch between latching and non-latching modes and an open-drain power-ON-reset output, this supervisor is able to handle any situation with ease. The low power consumption and wide operating temperature range makes it suitable for a range of environments where robust protection is necessary.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description