LTC2906ITS8#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - Supervisors are integrated circuits used to monitor and control different ASIC parameters , power management , thermal management and multiple other applications . The LTC2906ITS8#TRPBF is an integrated circuit from Texas Instruments ( TI ) used to monitor the current in power systems.

The LTC2906ITS8#TRPBF is a current monitor and supervision circuit that comes in an 8-pin TSOT package. It utilizes less than 220 µA quiescent current and consumes no power in shutdown mode. The circuit is designed to accurately measure the current in amplifiers, power supplies, motors, and other power systems.

The LTC2906ITS8#TRPBF utilizes an internal current monitor and supervisor to monitor and control load current as per the requirements of the system. It provides programmable current limit settings and prevents system overload in case of a fault in the system. The circuit also provides an internal reference voltage source to precisely monitor and control the current. The circuit also has a built-in temperature sensor for thermal management and protection.

The LTC2906ITS8#TRPBF has a wide range of applications such as motor control, power supplies, thermal management, and battery charging systems, among others. It can also be used to measure current in automotive, industrial, and military applications as well as in consumer electronics products. Additionally, it can be used as a reference source to build current-limiting system designs.

The LTC2906ITS8#TRPBF has a simple two-wire interface with an SPI-compatible serial interface port to program parameters, settings and to get real-time current information. The circuit also has an integrated voltage variable resistor for easy interface with the module. The integrated 8-bit ADC measures and transmits current values to the module for accurate current control and monitoring.

The working of the LTC2906ITS8#TRPBF is fairly simple. The circuit consists of a current source, a variable resistor, and an ADC. The current source and variable resistor are used to measure the current through the load while the ADC transmits the measured data to the module. The current is then compared with the programmed current limit and an interrupt is generated when the limit is reached. This interrupt can be used to protect the system from faults and overloads.

The LTC2906ITS8#TRPBF is a highly integrated, easy to use current monitoring and supervision circuit that can be used in wide range of applications. The integrated temperature sensor, 8-bit ADC and programmable limit settings allow it to be used for various applications. For such features, it is a great choice for designers looking for efficient current monitoring and control.

The specific data is subject to PDF, and the above content is for reference