LTC4304CMS#PBF

Delay Time:	--
Base Part Number:	LTC4304
Supplier Device Package:	10-MSOP
Package / Case:	10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
Operating Temperature:	0°C ~ 70°C
Current - Supply:	6mA
Voltage - Supply:	2.7 V ~ 5.5 V
Capacitance - Input:	10pF
Signal Conditioning:	--
Series:	--
Number of Channels:	2
Data Rate (Max):	400kHz
Output:	2-Wire Bus
Input:	2-Wire Bus
Applications:	I²C - Hotswap
Type:	Buffer, Accelerator
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:The LTC4304CMS#PBF Interface-Signal Buffers, Repeaters, Splitters is a unique device that utilizes a combination of a low power, voltage-mode digital isolator and a low-power, voltage-mode buffered amplifier to achieve extended performance in signaling applications. It is particularly suited for point-to-point, point-to-multipoint, ground loop and other isolated multipoint signaling applications. The combination of the deserializer and buffered amplifier also makes the LTC4304CMS#PBF suitable for transceiver applications.Application field:The LTC4304CMS#PBF has a wide application field, mainly for point-to-point, point-to-multipoint and isolated multilpint signaling applications. It can be used for ground loop isolators to eliminate ground potential differences, for serial data communication in medical equipment, safety and industrial controllers, data acquisition systems and portable instrumentation applications. It is also used in military and aerospace applications.Working Principle:The LTC4304CMS#PBF consists of two parts: a voltage-mode digital isolator and a low-power, voltage-mode buffered amplifier. The isolator is connected to both the input and the output, the buffered amplifier is connected only to the output. The isolator is used to separate the two sides of the signaling path. The digital isolator has two components: a Digital Isolator *xChannel* and a Digital Isolator *yChannel*. The *xChannel* isolator is used for isolating the AC-coupled input side from the DC-coupled output side. The *yChannel* isolator is used for determining the input signal level on the AC-coupled output side. The *xChannel* isolator also provides a **Digital Isolation Gain** (DIG) that adjusts the signal level to compensate for propagation delays of long cables.The buffered amplifier is used as a buffer between the output and the device under test. It uses low-power, voltage-mode amplifiers to provide extended performance and high noise immunity. The amplifier has a high input impedance and a low output impedance, which increases the signal-to-noise ratio. The amplifier also provides a high common-mode rejection ratio, which helps to reduce external interference.Conclusion:In conclusion, the LTC4304CMS#PBF is a powerful signaling device that combines voltage-mode digital isolator and low-power buffered amplifier to achieve extended performance in signaling applications. It isparticularly well-suited for point-to-point, point-to-multipoint, ground loop and other isolated multipoint signaling applications. The combination of the deserializer and buffered amplifier also makes the LTC4304CMS#PBF suitable for transceiver applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description