PCA9525DP,118 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PCA9525DP,118 is a part of the PCA9525 family of voltage-level translators and signal buffers/repeaters. It is designed to buffer and/or repeat digital signals over a wide range of supply voltages. It allows standard logic devices (e.g. FPGAs or microprocessors) to communicate with one another when isolated from each other by voltage or physical barriers. The PCA9525DP,118 has the ability to translate any logic signal level from 1V7 to any other logic level from 2V1 to 5V0. It can operate over a wide range of supply voltage, ranging from 5V0 to 3V3, as well as from 3V3 to 5V0.

The PCA9525DP,118 is a simple active device consisting of two voltage-level translators. Each buffer translates the logic signals from one voltage level to another. It can also be used to provide immunity to negative or positive transients within the system. It has a high-impedance input that resists contention with other on-board devices, while the low-impedance output is designed to attach directly to a load. Each of the four buffers has a direction control bit that determines the direction of the translation (from high to low, or from low to high).

PCA9525DP,118 is used in a variety of applications including noise immunity, isolation, and frequency conversion. The devices are used in digital communication systems where multiple logic levels may exist, such as ethernet, UART and Serial Peripheral Interface (SPI). In addition, it is also used for converting between 5V and 3V logic, extending cable lengths, and driving high capacitive loads. It is also used in industrial applications such as remote control, security systems, and DC motors.

The PCA9525DP,118 is a low-voltage single-supply buffer, designed to operate over voltage ranges of 3.3V - 5V. It has four separate input/output (I/O) buffers that are used to buffer, improve noise immunity and extend cable length in various applications. The input of these buffer is a high-impedance and is designed to source or sink a maximum of 18mA of current. The output of the buffer is low-impedance and is designed to efficiently drive capacitive loads. The direction control bit enables the buffer to be programmed for bidirectional operation, allowing it to function either as an output buffer or as an input buffer. It supports a wide range of clock frequencies, from KHz to GHz, making it ideal for high-speed applications.

In summary, the PCA9525DP,118 is a versatile signal buffer/repeater that is used in a wide range of applications to provide voltage translation, noise immunity, isolation, and frequency conversion. Its four separate input/output (I/O) buffers are used to buffer, improve noise immunity and extend cable length in various applications. The direction control bit enables the buffer to be programmed for bidirectional operation, allowing it to function either as an output buffer or as an input buffer. It supports a wide range of clock frequencies, from KHz to GHz, making it ideal for high-speed applications.

The specific data is subject to PDF, and the above content is for reference