LTC5596IDC#TRPBF

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Frequency:	100MHz ~ 40GHz
RF Type:	Cellular, WLAN
Input Range:	-40.8dBm ~ 6.3dBm
Accuracy:	±1dB
Voltage - Supply:	3.3V
Current - Supply:	30mA
Package / Case:	8-WFDFN Exposed Pad
Supplier Device Package:	8-DFN (2x2)
Base Part Number:	LTC5596

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The LTC5596IDC#TRPBF is an RF detector, an integrated circuit (IC) by Linear Technology for routing the RF signal to different processing stages. This RF detector has a variable detector threshold with high linearity, low power consumption, and flexible programming. This IC can be used in many applications.

Application Field

The LTC5596IDC#TRPBF has a wide variety of applications. It is used to route the RF signal to different processing stages, as this circuit provides very long duration of hold times with very short open windows. It serves as a very useful circuit when high linearity is required along with high DC accuracy. It is also used in Automatic Gain Control (AGC) circuits for microwave receivers. LTC5596IDC#TRPBF also has the application in adaptive threshold value setting in Wi-Fi radios, RF switching systems, and software-defined radios. Its low power consumption and ease of set up makes it an ideal choice for low power devices and to optimize the signal routing with the least possible power consumption and least time delay in the system.

Working Principle

The LTC5596IDC#TRPBF consists of two core components, namely, a detector and an amplifier. The detector part of the circuit is responsible for detecting the RF signal. This detector has an adjustable threshold that allows the user to set the level of signal strength required to initiate a signal routing process. The amplifier part of the circuit boosts and amplifies the detected RF signal above the threshold set by the user, allowing it to be sent to other processing stages in the system. The output of the amplifier is then fed to the output of the circuit. The output is either high or low based on the value of the signal strength above or below the set threshold. When the signal strength is above the threshold, the output of the circuit is high and when the signal strength is below the threshold, the output of the circuit is low. The output can also be used as an input to other circuits in the same system.

Conclusion

The LTC5596IDC#TRPBF is an RF Detector integrated circuit that has a wide variety of applications. It has adjustable detector threshold and high linearity, along with low power consumption and flexibility. The output of this circuit is either high or low depending on the signal strength above or below the set threshold. This circuit is used to route RF signal to different processing stages and is useful in many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description